Chapter 2 | Product Overview |
Board Features
•CPU features
♦Intel Celeron M 373 1.0 GHz with 512 kbytes L2 cache
♦Intel Pentium M 738 1.4 GHz with 2 Mbytes L2 cache
♦Intel Pentium M 745 1.8 GHz with 2 Mbytes L2 cache
♦All three CPUs use 400 MHz front side bus (FSB)
•Memory
♦Single standard
♦Supports +1.8V RAM up to 1 GB
♦Supports PC2 3200 DDR2 400 (400 Mbps, 200 MHz)
•Power Management
♦Supports ACPI 2.0 with S3 (Suspend to RAM)
•PCI Bus
♦PCI 2.1 compliant
♦PCI Bus speed at 33 MHz
•PCI Express
♦Supports 4 x1 PCI Express Lanes
♦Supports PCI Express edge card or ExpressCards on custom baseboard
♦Supports PCI Express specification v1.0a
•LPC Bus
♦Provides
♦Provides substitute for ISA bus with Super I/O chip on baseboard
•IDE/ATA Interfaces
♦Supports two Serial ATA interfaces
♦Supports one EIDE channel (UDMA 66/100)
♦Supports ATAPI and DVD peripherals
♦Supports IDE native and ATA compatibility modes
•Floppy Disk Interface
♦Shares output connector with Parallel port
♦Supports one standard
♦Supports all standard PC/AT formats: 360KB, 1.2MB, 720KB, 1.44MB
•Serial Ports
♦Provides two buffered TTL serial ports with full handshaking (transceiver on baseboard)
♦Provides
♦Supports full modem capability
♦Supports programmable word length, stop bits, and parity
♦Supports
XTX 820 | Reference Manual | 7 |