Ampro Corporation XTX 820 manual Ampro XTX Products, Ampro ETX Products, Other Ampro Products

Page 9

Chapter 1

About This Manual

Ampro XTX Products

•XTX 800 – This high-performance, compact, rugged Computer-On-Module (COM) solution uses Intel 1.8 GHz Pentium M 745, 1.4 GHz Pentium M 738, or 1.0 GHz Celeron M 373 with an Intel 852GM chipset. This XTX module comes standard with enhanced peripherals, including PCI bus, two Serial ATA ports and one Ultra/DMA 33/66/100 EIDE controller for two EIDE drives, six USB 2.0 ports, one shared EPP/ECP parallel/ floppy port, two serial ports with TTL levels, one Infrared (IrDA) port, PS/2 keyboard and mouse interfaces, and an AC’97/HDA (High Definition Audio) CODEC on the module. The XTX 800 also supports ACPI 2.0 Power Management, 10/100BaseT Ethernet interface, up to 1 GB of DDR RAM in a single 200-pin SODIMM slot, a 128-bit graphics controller for CRTs and LVDS flat panels, and a SDVO (Serial Digital Video Output) interface.

Ampro ETX Products

•ETX 700 – This high-performance, compact, rugged Computer-On-Module (COM) solution uses Intel→ 650 MHz Low Voltage Celeron→ or 400 MHz Ultra Low Voltage Celeron CPUs with up to 512 kB Level 2 Cache on board. This ETX module comes with the standard peripherals, including dual Ultra/DMA 33/66/100 IDE, floppy drive interface, PCI bus, ISA bus, serial, parallel, PS/2 keyboard and mouse interfaces, 10/100BaseT Ethernet, USB ports, AGP 4X equivalent video interface with up to 32 MB UMA Frame Buffer that supports built-in LVDS at 1600x1200 resolution, and AC’97 audio. It also supports up to 512 MB of SODIMM DRAM on a 50% thicker PCB to meet your custom baseboard needs.

•ETX 802 – This high-performance, compact, rugged Computer-On-Module (COM) solution uses Intel 1.4 GHz LV Pentium→ M 738,1.0 GHz Celeron M 373, or 800 MHz ULV Celeron M CPUs with an Intel 852GME chipset. This ETX module comes with the standard peripherals, including dual Ultra/DMA 33/66/100 IDE, floppy drive interface, PCI bus, ISA bus, serial, parallel, PS/2 keyboard and mouse interfaces, 10/100BaseT Ethernet, USB 2.0 ports, 128-bit graphics controller interface with up to 64 MB UMA Frame Buffer that supports CRT and LVDS at 1600x1200 resolution, and AC’97 audio. It also supports up to 1 GB of SODIMM DDR RAM on a 50% thicker PCB to meet your custom baseboard needs.

Other Ampro Products

•CoreModule™ Family – These complete embedded-PC subsystems on single PC/104 or PC/104- Plus form-factor (3.6"x3.8") modules feature 486, Celeron, or Celeron M CPUs. Each CoreModule includes a full complement of PC core logic functions, plus disk controllers, and serial and parallel ports. Most modules also include CRT and flat panel graphics controllers and/or an Ethernet interface. The CoreModules also come with built-in extras to meet the critical reliability requirements of embedded applications. These include onboard solid state disk compatibility, watchdog timer, and smart power monitor.

•LittleBoard™ Family – These high-performance, highly integrated single-board computers use the EBX form factor (5.75"x8.00"), and are available with the Intel Pentium M, Celeron M, Pentium III, or Celeron processors. The EBX-compliant LittleBoard single-board computers offer functions equivalent to a complete laptop or desktop PC system, plus several expansion cards. Built-in extras to meet the critical requirements of embedded applications include onboard solid state disk capability, watchdog timer, and smart power monitor.

•MightyBoard™ Family – These low-cost, high-performance single-board computers (SBC) use the Mini-ITX form factor (6.75"x 6.75") and are available with Intel Celeron M or Pentium M processors. MightyBoard products offer the equivalent functions of a complete laptop or desktop PC system, including DDR memory, high performance graphics, USB 2.0, Gigabit Ethernet, plus standard PCI expansion capability in one card slot.

XTX 820

Reference Manual

3

Page 8 Page 10
Image 9
Page 8 Page 10
Contents XTX Computer On Module Reference Manual Audience Assumptions Contents Index List of Figures List of Tables Reference Manual XTX Specifications Purpose of this ManualReference Material XTX 820 Support Products Related Ampro ProductsAmpro XTX Products Ampro ETX ProductsOther Ampro Products Chapter ETX→ Concept and XTX Extension Chapter Product OverviewHardware Design Path Product DescriptionBoard Features Chapter Chapter COM1 COM2 Block DiagramChip Type Mfg Model Description Function Major Integrated Circuits ICsCPU GmhcSignals Description Connector DefinitionsPhysical Specifications SpecificationsMechanical Specifications DimensionEnvironmental Specifications Power SpecificationsThermal/Cooling Solutions Parameter GHz ULV Celeron GHz LV Pentium M CharacteristicsOverview HardwareMemory CPU U1Available Typical Interrupt Source Connected to Pin Memory MapAddress Range Decimal Hex SizeAddress Range Size Description Decimal Hex Address MapAddress hex Size Available Description 0CFC 0CFFSignal PCI Bus Interface Connector J1PCI Bus Pin #PME GNTDevsel FrameAD9 GNDCBE0 AD6REQ CLKCBE3 CBE2CBE1 J1 Pin # Signal Description Signal Description Pin #Universal Serial Bus USB Serial Interrupt RequestPin # Signal Description VCC0 GNT0VCC1 SerirqVCC2 AoutrVCC3 ReservedVCC5 VCC4PCI Express/ExpressCards PCI Express Interface J2Additional Universal Serial Bus USB Ports Serial ATAExtended System Management LPC InterfacePCIREQ#A PCIGNT#AFantachoin FanpwmoutEXC1RST# Fan tachometer input Signal 34-Pin Description Pin # Cable Primary I/O Interface J3Floppy Port Parallel Port Signal DB25 Description Pin #Serial Ports 1 PS/2 Keyboard Infrared IrDA PortPS/2 Mouse CTS2Video Interface Internal Graphics FeaturesCRT Interface Video EngineLvds Interface J3 Pin # Signal Description TV Out Component and S-Video Comp Floppy Write Protect Senses the diskette is write protected MOT DRVIDE Ports IDE and Auxiliary Interface J4Pideior PideiowPiderdy CblidpTX+ Ethernet Port InterfaceLiled ActledPower Control Signals Power Management SignalsSpeaker SMBus I2C Bus Real Time Clock RTC/BatteryMatrix Component Address Binary GND2 I2DATGND4 GPE1GND5 GND7VCC6 RXD GPE2RXD+ TXDSdvo Port MiscellaneousTemperature Monitoring Serial Console Remote AccessWatchdog Timer WDT Power and Sleep States Power InputPower-On Switch PwrokSleep States Acpi Signal/Device Condition Wake Up ActivitiesGEP1 Introduction Accessing Bios Setup Utility VGA DisplayBios Setup Utility Menu Item/Topic Accessing Bios Setup Utility Remote AccessBios Main Setup Screen Bios MenusKey Description ESCAcpi Configuration Bios Advanced Setup ScreenPCI IRQ Resource Exclusion PCI ConfigurationSerial ATA in Enhanced/Native Mode Parallel ATA in Enhanced/Native ModeAzalia Intel High Definition Audio Graphics Configuration Flat Panel Resolution BITs AutoChipset Configuration CPU ConfigurationInterface Configuration PCI Express ConfigurationClock Configuration Primary IDE Master Not Detected or Device Type IDE ConfigurationChapter Bios Setup Utility Secondary IDE Master Not Detected or Device Type Primary IDE Slave Not Detected or Device TypeThird IDE Master Not Detected or Device Type Secondary IDE Slave Not Detected or Device TypeFourth IDE Master Not Detected or Device Type Third IDE Slave Not Detected or Device TypeFourth IDE Slave Not Detected or Device Type Module Version USB Devices Enabled Drives None USB ConfigurationUSB Mass Storage Device Configuration Bios Post Keyboard/Mouse ConfigurationHardware Health Configuration Watchdog ConfigurationHardware Health Event Monitoring Chapter Bios Setup Utility Bios Boot Setup Screen Boot Priority Selection Device Based or Type BasedBoot Device Priority Boot Settings Configuration Loss Control feature To clear Supervisor password Bios Security Setup ScreenHard Disk Security APM Bios Power Setup ScreenChapter Bios Setup Utility Exit Options Bios Exit Setup ScreenLoading Defaults Reference Manual XTX Method Contact Information Appendix a Technical SupportAppendix a Appendix B LAN Boot Feature Initializing Intel R Boot Agent FE PXE v2.0 Build 0xx WfM Accessing the LAN PXE Boot FeaturePress F12 if you want to boot from the Network Alternate Method of Selecting LAN BootReference Manual XTX J6 Sdvo Appendix C Connector Part NumbersAppendix C PCI AcpiUSB CD-ROMRTC Real Time Clock RTC Reference material WDT

XTX 820 specifications

Ampro Corporation has made a significant mark in the world of embedded systems with its versatile XTX 820 embedded computing module. The XTX 820 is designed to cater to a wide array of applications, ranging from industrial automation to medical devices, providing developers with a powerful yet compact solution.

One of the standout features of the XTX 820 is its advanced processing capabilities. The module is equipped with an Intel Atom processor, which delivers impressive performance while operating at low power levels. This combination makes the XTX 820 suitable for environments where energy efficiency is essential. The Atom processor allows for seamless multitasking and support for demanding applications without compromising on thermal efficiency.

In terms of memory, the XTX 820 supports a range of configurations, accommodating both DDR2 and DDR3 memory types. With a maximum of up to 4GB of onboard memory, this module ensures that applications can run smoothly and efficiently across various tasks. The flexibility in memory options enables developers to tailor their designs according to specific project needs.

Connectivity is another strong suit of the XTX 820. The module comes with multiple I/O interfaces that enhance its utility in various applications. It features USB, Serial, and Parallel ports, along with support for LVDS display and audio interfaces. This diverse range of connectivity options allows the XTX 820 to integrate easily with a variety of systems and devices, facilitating seamless data transfer and communication.

Security is increasingly critical in embedded systems, and Ampro has integrated robust security features into the XTX 820. This includes support for hardware-based security solutions, which can protect sensitive data and prevent unauthorized access. Such characteristics make the module a suitable choice for industries where data integrity is paramount.

Furthermore, the XTX 820 boasts an impressive range of environmental operating conditions. It is designed to function in extreme temperatures, making it suitable for outdoor and industrial applications where fluctuations in temperature can be a concern.

In conclusion, the Ampro Corporation XTX 820 embedded computing module emerges as a versatile platform that combines performance, memory flexibility, robust connectivity, and enhanced security features. Its design is tailored to meet the demands of various industries, making it a reliable choice for developers looking for advanced embedded solutions.
Top Page Image Contents