Ampro Corporation XTX 820 manual Bios Exit Setup Screen, Exit Options

Chapter 4BIOS Setup Utility

BIOS Exit Setup Screen

BIOS Setup Utility

Main	Advanced	Boot	Security	Power	Exit
Exit Options						Exit System Setup
						after saving the
Save Changes and Exit
Discard Changes and Exit						changes.
Discard Changes						F10 key can be used
Load CMOS Defaults						for this operation

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

V02.xx (C) Copyright 1985-2004, American Megatrends, Inc.

Figure 4-6. BIOS Exit Setup Screen

Exit Options

•Save Changes and Exit

This selection allows you to leave Setup, saving your changes, and rebooting the system so the new BIOS Setup configuration parameters can take effect.

•Select Save Changes and Exit from the Exit Options menu and press <Enter>. The following text appears on screen:

Save Configuration Changes and Exit Now?

[Ok][Cancel]

•Select Ok to save changes and exit.

The < F10 > key can also be used for this operation.

•Discard Changes and Exit

This selection allows you to quit Setup without making any permanent changes to the BIOS Setup system configuration.

•Select Discard Changes and Exit from the Exit Options menu and press <Enter>. The following text appears on screen:

Discard Changes and Exit Setup Now?

[Ok][Cancel]

•Select Ok to discard changes and exit.

The < ESC > key can also be used for this operation.

88 Reference Manual XTX 820