Honeywell NETAXS-123 manual Off

Installing the NetAXS-123 Panels

Installation

Table 8: NetAXS-123 SW1 DIP Switch Settings (continued)

S1	S2	S3	S4	S5	S6	S7a	S8b	S9b	S10	Selection
OFF	ON	ON	OFF	ON						Address 22
ON	ON	ON	OFF	ON						Address 23
OFF	OFF	OFF	ON	ON						Address 24
ON	OFF	OFF	ON	ON						Address 25
OFF	ON	OFF	ON	ON						Address 26
ON	ON	OFF	ON	ON						Address 27
OFF	OFF	ON	ON	ON						Address 28
ON	OFF	ON	ON	ON						Address 29
OFF	ON	ON	ON	ON						Address 30
ON	ON	ON	ON	ON						Address 31
					OFF					Downstream
										Panel
					ON					Gateway Panel
										(Default)
						OFF				Uses the User
										Provided
										Ethernet IP
										address (Default)
						ON				Uses the Default
										Ethernet IP
										Address
										(192.168.1.150)
							OFF	OFF		RS-485_1
										termination
										(EOL)
										DISABLED
										(Default)
							ON	ON		RS-485_1
										termination
										(EOL)
										ENABLED
										(Default)
									OFF	Future Use
										(Default)
									ON	Future Use

a.DIP Switch 7 does NOT require a panel reboot to take effect. This does not affect the USB IP address.

NetAXS-123 Access Control Unit Installation Guide, Document 800-05779, Revision A 37