Honeywell NETAXS-123 manual Maintenance

Page 72

Installing the NetAXS-123 Panels

Maintenance

7.0 Maintenance

Perform the following maintenance on the NetAXS-123 enclosure:

•Change the backup battery every two to two-and-a-half years.

•Oil the lock once per year.

•Use the following procedure to change the 1A, 250V, Bussan type GMA fuse in the fuse terminal block Power Supply module.

Warning: Be sure to disconnect the AC power before replacing the terminal block fuse.

Warning: To reduce the risk of fire, replace the fuse only with a 1A, 250V, Bussan type GMA fuse.

1.Disconnect the AC power.

2.Replace the fuse with a new 1A, 250V, Bussan type GMA fuse.

3.Re-connect the AC power.

Note: The power supply contains no serviceable parts. There is no replaceable fuse inside the power supply.

•Use the following procedure to change the 1A, 250V, Bussan type GMA fuse in the power inlet terminal block.

Warning: Be sure to disconnect the AC power before removing the fuse holder from the power inlet terminal block.

Warning: To reduce the risk of fire, replace the fuse only with a 1A, 250V, Bussan type GMA fuse.

1.Disconnect the AC power.

2.Remove the fuse holder from the power inlet terminal block to identify the location of the power inlet terminal block).

3.Replace the blown fuse in the lower section of the fuse holder with the new fuse. The upper section of the fuse holder provides a convenient location for a spare fuse.

4.Slide the fuse holder back into the power inlet terminal block.

5.Re-connect the AC power.

64www.honeywell.com

Page 71 Page 73
Image 72
Page 71 Page 73
Contents NetAXS-123 Page Contents RS-485 Connection via PCI-3 RS-485 Connection via NetAXS-123 List of Figures Page List of Tables Page Installing the NetAXS-123 Panels Access Control Overview IntroductionNetAXS-123 Overview NetAXS-123 Compact Enclosure Wiring and Components Panel Components and DescriptionsNetAXS-123 Standard Enclosure Panel Wiring and Components Supervised Input Wiring Board Configuration Terminal BlockSupervised Input Terminal Blocks Typical Supervised Input Wiring Diagram Supervised Tamper Terminal BlocksNetAXS-123 Access Control Unit NetAXS-123 Add-On BoardNetAXS-123 Input/Output Options Board Readers Inputs/OutputsSupported Readers Readers Supported by NetAXS-123Series Reader Model Honeywell Part Number Power Supply Real-Time Clock ProtectionBattery SuppressorsInstallation Installing the Compact Enclosure PanelInstalling on a Wall Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing over a Gang Box Installing on a Flat Surface Installing the Standard Enclosure Panel Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Installing the Add-On Board Installing the NetAXS-123 Panels Installing the NetAXS-123 Panels Wiring the Readers Wiring Readers to the Controller BoardFactory Default Configuration Settings for Door IN9 REX IO-TB5 Wiring Door Strikes Or S4 Setting DIP Switches and Jumpers Controller Board DIP Switch and Jumper SettingsNetAXS-123 SW1 DIP Switch Settings S7 a S8 b S9 b S10 SelectionOFF NetAXS-123 SW2 DIP Switch Settings S1a S2a SelectionNetAXS-123 Controller Board Jumpers ExternalAdd-On Board DIP Switch and Jumper Settings Normally Open Normally ClosedSetting the jumpers to configure the relay position 12V ExternalCommunications USB CommunicationsInstalling the NetAXS-123 Panels 2 RS-485 Communications RS-485 Configuration via N-485-PCI-3 RS-485 Configuration via NetAXS-123 Gateway Ethernet TCP/IP Configuration Ethernet TCP/IP CommunicationsSystem Configuration Ethernet ConnectionUSB Connection NetAXS-123 USB ConnectionRS-485 Connection via PCI-3 RS-485 Connection via PCI-3RS-485 Connection via NetAXS-123 Installing the NetAXS-123 Panels PCI3 M-56K Dial-up Modem, RS-485 Connection via Hub PCI-3 56K Dial-up Modem, RS-485 Connection via HubFiber Converter to RS-485 Connection via PCI-3 Fiber Converter to RS-485 Connection via PCI-3Fiber Converter to RS-485 Connection via NetAXS-123 Fiber Converter to RS-485 Connection via NetAXS-123Installing the NetAXS-123 Panels Ground only one Mixed Loops Hardware Specifications PoE Power LimitationsRelay Contacts Reader InterfaceMechanical Device Element CurrentReader Wiring EnvironmentCable Basic Standalone Operation Card Read / Door Lock OperationDoor Egress / Door Lock / Door Status Operation Maintenance Troubleshooting Troubleshooting Problems and SolutionsProblem Solution Technical Support Normal Support HoursWeb This page is left blank for printing purposes Honeywell Access Systems

NETAXS-123 specifications

The Honeywell NETAXS-123 is an advanced access control solution designed to enhance security and efficiency for various facilities, including commercial buildings, educational institutions, and healthcare facilities. It provides a versatile platform that integrates cutting-edge technologies to simplify access management while maintaining a high level of protection.

One of the standout features of the NETAXS-123 is its web-based interface, which allows administrators to manage access from anywhere with an internet connection. This cloud-based accessibility is a significant advantage for organizations that require real-time monitoring and control over their security systems. Users can easily configure access rights, generate reports, and monitor system events through a user-friendly dashboard that minimizes the need for extensive training.

The NETAXS-123 supports a range of authentication methods, including key cards, biometric readers, and mobile credentials, ensuring that organizations can implement the best solution for their specific security needs. The system facilitates multiple entry points, enabling different access levels for various personnel, which helps in maintaining strict control over sensitive areas.

Another feature is its scalability. The NETAXS-123 can accommodate small installations with just a few doors and is easily expandable to support larger operations with dozens of access points. This flexibility makes it ideal for growing organizations that anticipate changes in their access control needs.

The system is equipped with advanced reporting capabilities, allowing administrators to generate detailed activity logs and audit trails. These logs play a crucial role in investigating incidents and ensuring compliance with industry regulations and standards, making the NETAXS-123 a reliable choice for organizations focused on security and accountability.

In terms of connectivity, the NETAXS-123 integrates seamlessly with existing IT infrastructures, supporting Ethernet and Wi-Fi connectivity options. This compatibility ensures smooth operation and easy integration with other security systems like CCTV and alarm monitoring.

The hardware components of the NETAXS-123 are built with durable materials, ensuring longevity and reliable performance, even in demanding environments. With features such as power over Ethernet (PoE), the system simplifies installation by reducing the need for separate power sources, allowing for more streamlined deployments.

In conclusion, the Honeywell NETAXS-123 combines advanced features, user-friendly technology, and robust security measures to deliver an effective access control solution. Its scalability, diverse authentication methods, and real-time management capabilities make it a top choice for organizations looking to enhance their security infrastructure.
Top Page Image Contents