USING SET MENU
The flow chart of SET MENU
The following diagram illustrates the overall flow of the setup procedure.
Run LANGUAGE SETUP.
See “CHANGING OSD LANGUAGE” on page 28.
Run AUTO SETUP (IntelliBeam).
See “AUTO SETUP (IntelliBeam)” on page 29.
If an error occurs
Look for a remedy.
See “Error messages for AUTO SETUP” on page 35 for a complete list of error messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See “PLAYBACK” on page 39.
If you want to make additional settings and adjustments
SETUP
Run MANUAL SETUP.
See “MANUAL SETUP” on page 60.
y
•If you cannot clearly hear a sound beam from a specific channel, adjust settings for SETTING PARAMETERS (see page 62) or for BEAM ADJUSTMENT (see page 63) in
BEAM MENU.
•If there are acoustically absorbent objects such as curtains in the path of the sound beams, adjust settings for TREBLE GAIN in BEAM MENU (see page 65).
English