Yamaha YSP-1100 owner manual Enjoying Stereo Sound, Stereo playback, 47 En

ENJOYING STEREO SOUND

Stereo playback

You can enjoy 2-channel stereo playback by changing the beam mode to the stereo playback using the beam mode buttons on the remote control. The normal sounds are output from the front and left channels in the 2-channel stereo. This is ideal for playing back hi-fi sources, such as CDs, and can be used to replace your TV speakers.

AUTO

VOL MODE SETUP INPUTMODE SLEEP

5BEAM	ST+3BEAM	3BEAM
1	2	3
STEREO	MY BEAM SURROUND
4	5	6
MUSIC	MOVIE	SPORTS
7	8	9
OFF
0	+10
CH LEVEL		MENU
	ENTER	TV/AV
		YSP
TEST		RETURN

Notes

•When you play back multi-channel sources, all signals except those for the front left and right channels are mixed down and output from the front left and right channels. No audio is output from the center and rear channels.

•The surround mode becomes disabled when the stereo playback is selected as the beam mode.

•When you play back Dolby Digital audio signals in the stereo playback, the dynamic range becomes compressed. If the volume level decreases to the extreme, use other beam modes except the my beam.

•If the stereo playback is selected as the beam mode, the surround modes (see page 44) and the CINEMA DSP programs (see page 52) become ineffective.

1Set the operation mode selector to YSP to switch to the operation mode of this unit.

TV/AV

YSP

2Press STEREO on the remote control to select the stereo playback as a beam mode.

STEREO

4

OPERATION BASIC

English

47 En