Yamaha YSP-1100 owner manual Selecting the Input Mode, 75 En, Auto, Dts, Analog

Page 79

SELECTING THE INPUT MODE

You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source.

y

We recommend setting the input mode to AUTO in most cases.

Notes

STANDBY/ON

POWER POWER

AV TV

STB VCR DVD AUX

TV

INPUT1 INPUT2 MACRO

TV

AUTO

VOL MODE SETUP INPUTMODE SLEEP

1Set the operation mode selector to YSP to switch to the operation mode of this unit.

TV/AV

YSP

2Press one of the input selector buttons on the remote control to select the desired input source.

•The input mode of VCR is fixed to ANALOG. However, if the TV OPTICAL IN jack of this unit is assigned to VCR, AUTO, DTS and ANALOG become available as the input mode of VCR (see page 68).

•ANALOG is not available as the input mode of DVD and AUX.

•AUTO

Automatically selects audio input signals in the following priority order:

1)Dolby Digital or DTS

2)PCM

3)Analog

Use this input mode in most cases.

• DTS

Selects only digital signals encoded in DTS. Compared to AUTO, this input mode provides greater stability while playing back CDs or LDs encoded in DTS.

• ANALOG

Selects only analog signals.

Even when both digital and analog signals are input simultaneously, only analog signals are selected.

STB

VCR

TV

DVD

AUX

y

You can adjust the default input mode to be selected when the power of this unit is turned on (see page 69).

3Press INPUTMODE on the remote control repeatedly to toggle between input modes.

INPUTMODE

TV AUTO

DVD AUTO

AUX AUTO

TV DTS

DVD DTS

AUX DTS

TV ANALOG

 

 

When TV or STB

When DVD is

When AUX is

is selected as

selected as the

selected as the

the input source

input source

input source

OPERATION

ADVANCED

 

 

English

75 En

Page 78 Page 80
Image 79
Page 78 Page 80
Contents YSP-1100 Explanation of Graphical Symbols Important Safety InstructionsIi En FCC Information for US customersFor Canadian Customers Iii EnContents Overview Features Using this Manual Cable clamp ⋅1 White/Red Fasteners ⋅4 Supplied AccessoriesRemote control ⋅1 Yellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1STANDBY/ON Controls and FunctionsFront panel InputFront panel display Rear panel Remote control 10 En 11 En InstallationBefore installing this unit Installing this unit12 En Installation examplesExample Using a rack Using a metal wall bracketUsing a stand Using a TV standAffixing this unit 14 EnFasteners For video output Connections15 En For audio input For video inputCables used for audio connections Connecting a TV16 En Audio connections Video connections17 En Connecting a DVD player/recorderDVD player/recorder Video Connecting a VCR18 En Audio connections19 En Connecting a digital satellite tuner or a cable TV tuner20 En Connecting a digital airwave tunerDigital airwave tuner CD player, etc Optical digital Output Connecting other external components21 En Cables used for connections22 En Connecting a subwooferSubwoofer Monaural Input Rear panel of this unit To the AC outlet Connecting the power supply cableAbout the RS-232C/REMOTE IN/IR-OUT terminals 23 EnGetting Started Installing batteries in the remote controlOperation range of the remote control Close the battery coverFunction-varying buttons Using the remote control Turning on the powerOperational buttons only when YSP is Selected 25 EnOSD screen example Using SET MenuDisplaying the OSD 26 En27 En Flow chart of SET MenuChanging OSD Language Language SetupPress Menu on the remote control Press / to select Language Setup and then press Enter29 En Flow chart of Auto Setup30 En Installing the optimizer microphoneCenter line Using Auto Setup IntelliBeam31 En Assembling the supplied cardboard Microphone stand32 En Auto Setup33 En Auto Setup StartBEAM+SOUND Optimz Example Show Result34 En Side view35 En Error messages for Auto SetupBefore the Auto Setup procedure starts While the Auto Setup procedure is in progress36 En Using the System MemorySaving settings Convenient usage of the system memoryPress Enter again Loading settingsSET Menu 37 En38 En 1MEMORY LoadPress / to select Load and then press 39 En Remote control operationsPlayback Selecting the input source40 En Playing back sources41 En Adjusting the volumePress Mute on the remote control to mute the sound Muting the sound42 En Press 5BEAM on the remote control to select the 5 beamEnjoying Surround Sound BeamStereo plus 3 beam Beam Press 3BEAM on the remote control to select the 3 beam43 En Surround modes and recommended sources Decoder indicatorsStatus Indicator 44 EnSurround sound Enjoying 2-channel sources45 En 46 En Adjusting surround mode parametersWhen Dolby Pro Logic II Music is selected When DTS Neo6 Music is selectedStereo playback Enjoying Stereo Sound47 En 48 En Using auto-adjust functionMy beam microphone 49 En Using manual-adjust functionPress MY Beam on the remote control Press / while MY Beam is displayed to adjust the angleElements of a sound field Using Sound Field ProgramsWhat is a sound field? 50 En51 En Sound field program descriptionsMusic programs 52 EnMovie programs Sports program 53 En54 En Press / on the remote control55 En Using the Volume ModeEffect.LvlMIN Effect.LvlMID Effect.LvlMAX 56 En57 En Press on the remote control58 En Using the Sleep TimerSetting the sleep timer Unit to confirm the setting for the sleep timer59 En Canceling the sleep timerDisappears 60 En Manual Setup61 En Using Manual SetupPress / to select Manual Setup and then press Enter Press / / / and Enter to configure each parameter62 En Setting parametersInstalled Position Installed position of this unit 2BEAM Menu63 En Bbeam AdjustmentBeam Adjustment Beam adjustment Installed Height Installed height of this unitBeam Travel Length Beam travel length 64 EnHorizontal Angle Horizontal angle Vertical Angle Vertical angleFront left channel 65 EnFocal Length Focal length Treble Gain Treble gainImage Location Image location 1SOUND MenuCimage Location 66 EnEroom EQ Daudio DelayBsubwoofer SET Cmute Level68 En Input MenuAinput Assignment 1/4 Ainput Assignment 2/4Cinput Trim Binput ModeAinput Assignment 3/4 Ainput Assignment 4/470 En Dimmer SET Dimmer settingsDinput Rename Adimmer SETCunit SET OSD SET OSD settingsUnit SET Unit settings Bosd SET72 En Adjusting the Audio BalanceUsing the test tone Press / to select the channel you want to adjustPress Test when you have completed all your adjustments Using the audio output being player back73 En 74 En DTS Selecting the Input Mode75 En AutoRelease Input on the front panel Adjusting System ParametersSetting the Memory Protect 76 En77 En Setting the MAX VolumePress / to switch between Protect on Protect OFF Press / to adjust the maximum volume level78 En Setting the Turn on VolumeSetting the Demo Mode Press / to adjust the initial volume levelPress / to switch between Demo on Demo OFF Setting the Factory Preset79 En 80 En Press / to switch between Preset Reset and Preset CancelCode SET Remote Control FeaturesSetting remote control codes 81 EnOperating your DVD player Controlling other components82 En Operating your TVOperating your VCR Operating your STB CATV/Satellite tuner 83 EnOperation buttons for DVD and VCR Setting macros for the TV with the tuning capability Using the TV macro84 En Operating macros Setting macros for the TV without the tuning capabilityCanceling the macros 85 En86 En TroubleshootingGeneral 87 En 88 En Remote control89 En GlossaryAudio formats Audio information90 En IndexSpeaker Section Specifications91 En AMP SectionCable TV Tuner DVD PlayerVCR 834 Satellite TunerAll rights reserved On the upper shelf to keep it away from the floor Cables used for connectionsEnjoying surround sound
Top Page Image Contents