ADJUSTING THE AUDIO BALANCE
Note
SWFR is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 66).
3Press 
/ 
to adjust channel volumes.
ENTER
Control range:
4Wait for a few seconds without operating this unit when you have completed your adjustment.
Notes
•All the channel levels cannot be adjusted when the stereo playback is selected as the beam mode (see page 47).
•FRONT L/R cannot be adjusted when the stereo plus 3 is selected as the beam mode (see page 41).
•Only CENTER can be adjusted when the my beam is selected as the beam mode (see page 48).
•FRONT L/R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode (see pages 43 and 47).
y
If the level of a particular channel cannot be adjusted, –