Yamaha YSP-1100 owner manual 88 En, Remote control

Page 92

TROUBLESHOOTING

Remote control

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

The remote control does not work

Wrong distance or angle.

The remote control will function within a

24

and/or function properly.

 

maximum range of 6 m and no more than

 

 

 

30 degrees off-axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

 

inverter type of fluorescent lamp, etc.) is

 

 

 

striking the remote control sensor of this

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

24

 

 

 

 

You cannot operate external

The external component you want to

Press INPUT on the front panel or the

39

components with this unit’s

operate is not selected as the input

input selector buttons on the remote

 

remote control.

source.

control to select the external component

 

 

 

you want to operate.

 

 

 

 

 

 

The remote control code was not

Set the remote control code correctly or

81

 

correctly set.

try another code for the same

 

 

 

manufacturer using the “LIST OF

 

 

 

REMOTE CONTROL CODES” at the

 

 

 

end of this manual.

 

 

 

 

 

 

Even if the remote control code is

Use the remote control supplied with the

 

correctly set, there are some models that

external component.

 

 

do not respond to the remote control.

 

 

 

 

 

 

The cursor buttons do not work

The operation mode selector was

Set the operation mode selector to YSP.

during SET MENU operation.

unwantedly set to TV/AV.

 

 

 

 

 

 

You cannot use the my beam auto-

Wrong distance or angle.

The remote control will function within a

24

adjust function.

 

maximum range of 6 m and no more than

 

 

 

30 degrees off-axis from the front panel.

 

 

 

 

 

88 En

Image 92
Contents YSP-1100 Important Safety Instructions Explanation of Graphical SymbolsFCC Information for US customers Ii EnIii En For Canadian CustomersContents Overview Features Using this Manual Supplied Accessories Remote control ⋅1Yellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1 Cable clamp ⋅1 White/Red Fasteners ⋅4Controls and Functions Front panelInput STANDBY/ONFront panel display Rear panel Remote control 10 En Installation Before installing this unitInstalling this unit 11 EnExample Installation examples12 En Using a metal wall bracket Using a standUsing a TV stand Using a rackFasteners 14 EnAffixing this unit Connections 15 EnFor audio input For video input For video outputConnecting a TV 16 EnAudio connections Video connections Cables used for audio connectionsDVD player/recorder Connecting a DVD player/recorder17 En Connecting a VCR 18 EnAudio connections VideoConnecting a digital satellite tuner or a cable TV tuner 19 EnDigital airwave tuner Connecting a digital airwave tuner20 En Connecting other external components 21 EnCables used for connections CD player, etc Optical digital OutputSubwoofer Monaural Input Rear panel of this unit Connecting a subwoofer22 En Connecting the power supply cable About the RS-232C/REMOTE IN/IR-OUT terminals23 En To the AC outletInstalling batteries in the remote control Operation range of the remote controlClose the battery cover Getting StartedUsing the remote control Turning on the power Operational buttons only when YSP is Selected25 En Function-varying buttonsUsing SET Menu Displaying the OSD26 En OSD screen exampleFlow chart of SET Menu 27 EnLanguage Setup Press Menu on the remote controlPress / to select Language Setup and then press Enter Changing OSD LanguageFlow chart of Auto Setup 29 EnInstalling the optimizer microphone 30 EnUsing Auto Setup IntelliBeam 31 EnAssembling the supplied cardboard Microphone stand Center lineAuto Setup 32 EnBEAM+SOUND Optimz Auto Setup Start33 En Show Result 34 EnSide view ExampleError messages for Auto Setup Before the Auto Setup procedure startsWhile the Auto Setup procedure is in progress 35 EnUsing the System Memory Saving settingsConvenient usage of the system memory 36 EnLoading settings SET Menu37 En Press Enter againPress / to select Load and then press 1MEMORY Load38 En Remote control operations PlaybackSelecting the input source 39 EnPlaying back sources 40 EnAdjusting the volume Press Mute on the remote control to mute the soundMuting the sound 41 EnPress 5BEAM on the remote control to select the 5 beam Enjoying Surround SoundBeam 42 En43 En Press 3BEAM on the remote control to select the 3 beamStereo plus 3 beam Beam Decoder indicators Status Indicator44 En Surround modes and recommended sources45 En Enjoying 2-channel sourcesSurround sound Adjusting surround mode parameters When Dolby Pro Logic II Music is selectedWhen DTS Neo6 Music is selected 46 En47 En Enjoying Stereo SoundStereo playback My beam microphone Using auto-adjust function48 En Using manual-adjust function Press MY Beam on the remote controlPress / while MY Beam is displayed to adjust the angle 49 EnUsing Sound Field Programs What is a sound field?50 En Elements of a sound fieldSound field program descriptions 51 EnMovie programs 52 EnMusic programs 53 En Sports programPress / on the remote control 54 EnUsing the Volume Mode 55 En56 En Effect.LvlMIN Effect.LvlMID Effect.LvlMAXPress on the remote control 57 EnUsing the Sleep Timer Setting the sleep timerUnit to confirm the setting for the sleep timer 58 EnDisappears Canceling the sleep timer59 En Manual Setup 60 EnUsing Manual Setup Press / to select Manual Setup and then press EnterPress / / / and Enter to configure each parameter 61 EnSetting parameters Installed Position Installed position of this unit2BEAM Menu 62 EnBbeam Adjustment Beam Adjustment Beam adjustmentInstalled Height Installed height of this unit 63 En64 En Horizontal Angle Horizontal angleVertical Angle Vertical angle Beam Travel Length Beam travel length65 En Focal Length Focal lengthTreble Gain Treble gain Front left channel1SOUND Menu Cimage Location66 En Image Location Image locationDaudio Delay Bsubwoofer SETCmute Level Eroom EQInput Menu Ainput Assignment 1/4Ainput Assignment 2/4 68 EnBinput Mode Ainput Assignment 3/4Ainput Assignment 4/4 Cinput TrimDimmer SET Dimmer settings Dinput RenameAdimmer SET 70 EnOSD SET OSD settings Unit SET Unit settingsBosd SET Cunit SETAdjusting the Audio Balance Using the test tonePress / to select the channel you want to adjust 72 En73 En Using the audio output being player backPress Test when you have completed all your adjustments 74 En Selecting the Input Mode 75 EnAuto DTSAdjusting System Parameters Setting the Memory Protect76 En Release Input on the front panelSetting the MAX Volume Press / to switch between Protect on Protect OFFPress / to adjust the maximum volume level 77 EnSetting the Turn on Volume Setting the Demo ModePress / to adjust the initial volume level 78 En79 En Setting the Factory PresetPress / to switch between Demo on Demo OFF Press / to switch between Preset Reset and Preset Cancel 80 EnRemote Control Features Setting remote control codes81 En Code SETControlling other components 82 EnOperating your TV Operating your DVD playerOperation buttons for DVD and VCR 83 EnOperating your VCR Operating your STB CATV/Satellite tuner 84 En Using the TV macroSetting macros for the TV with the tuning capability Setting macros for the TV without the tuning capability Canceling the macros85 En Operating macrosGeneral Troubleshooting86 En 87 En Remote control 88 EnGlossary Audio formatsAudio information 89 EnIndex 90 EnSpecifications 91 EnAMP Section Speaker SectionVCR DVD PlayerCable TV Tuner Satellite Tuner 834All rights reserved Cables used for connections On the upper shelf to keep it away from the floorEnjoying surround sound