Yamaha YSP-1100 65 En, Focal Length Focal length, Treble Gain Treble gain, Front left channel

Page 69

FOCAL LENGTH (Focal length)

Use to set the distance from the front of this unit to the focal point of output for each channel and adjust an expansive feeling of each channel.

The focal points except the center channel should be set near the reflection points on the walls. The shorter the distance, more the expansion.

focal length

focal point

sweet spot

Front left channel

Center channel

 

 

 

 

( )

(+)

Choices: –1.0 m to +13.0 m

Adjust towards – (minus) to move the focus outward and adjust towards + (plus) to move the focus towards the normal position.

Front L adjusts the focal length for the front left sound beams.

Front R adjusts the focal length for the front right sound beams.

Center adjusts the focal length for the center sound beams. Initial setting: –0.5 m

Surround L adjusts the focal length for the surround left sound beams.

Surround R adjusts the focal length for the surround right sound beams.

y

We recommend that you use the initial setting (–0.5 m) for the center channel.

d)FOCAL LENGTH

5 beam

. Front L;;;;;;+1.5m Front R;;;;;;+1.5m Center;;;;;;;-0.5m Surround L;;;+2.3m Surround R;;;+2.3m

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

MANUAL SETUP

TREBLE GAIN (Treble gain)

Use to adjust the high frequency output level of each channel.

y

If the reflection point of the front left and right or surround left and right sound beams is a curtain or other acoustically absorbent surface, you can achieve more effective surround sound by increasing the treble level for those sound beams.

Choices: –12.0 dB to +12.0 dB

Initial setting: 0 dB

FL adjusts the high frequency output level of the front left channel.

FR adjusts the high frequency output level of the front right channel.

C adjusts the high frequency output level of the center channel.

SL adjusts the high frequency output level of the surround left channel.

SR adjusts the high frequency output level of the surround right channel.

e)TREBLE GAIN

-5beam+

. Front L;;;;;;;;0dB ------

Front R;;;;;;;;0dB ------

Center;;;;;;;;;0dB ------

Surround L;;;;;0dB ------

Surround R;;;;;0dB ------

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

OPERATION

ADVANCED

 

 

English

65 En

Image 69
Contents YSP-1100 Explanation of Graphical Symbols Important Safety InstructionsIi En FCC Information for US customersFor Canadian Customers Iii EnContents Overview Features Using this Manual Remote control ⋅1 Supplied AccessoriesYellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1 Cable clamp ⋅1 White/Red Fasteners ⋅4Front panel Controls and FunctionsInput STANDBY/ONFront panel display Rear panel Remote control 10 En Before installing this unit InstallationInstalling this unit 11 EnInstallation examples 12 EnExample Using a stand Using a metal wall bracketUsing a TV stand Using a rack14 En Affixing this unitFasteners 15 En ConnectionsFor audio input For video input For video output16 En Connecting a TVAudio connections Video connections Cables used for audio connectionsConnecting a DVD player/recorder 17 EnDVD player/recorder 18 En Connecting a VCRAudio connections Video19 En Connecting a digital satellite tuner or a cable TV tunerConnecting a digital airwave tuner 20 EnDigital airwave tuner 21 En Connecting other external componentsCables used for connections CD player, etc Optical digital OutputConnecting a subwoofer 22 EnSubwoofer Monaural Input Rear panel of this unit About the RS-232C/REMOTE IN/IR-OUT terminals Connecting the power supply cable23 En To the AC outletOperation range of the remote control Installing batteries in the remote controlClose the battery cover Getting StartedOperational buttons only when YSP is Selected Using the remote control Turning on the power25 En Function-varying buttonsDisplaying the OSD Using SET Menu26 En OSD screen example27 En Flow chart of SET MenuPress Menu on the remote control Language SetupPress / to select Language Setup and then press Enter Changing OSD Language29 En Flow chart of Auto Setup30 En Installing the optimizer microphone31 En Using Auto Setup IntelliBeamAssembling the supplied cardboard Microphone stand Center line32 En Auto SetupAuto Setup Start 33 EnBEAM+SOUND Optimz 34 En Show ResultSide view ExampleBefore the Auto Setup procedure starts Error messages for Auto SetupWhile the Auto Setup procedure is in progress 35 EnSaving settings Using the System MemoryConvenient usage of the system memory 36 EnSET Menu Loading settings37 En Press Enter again1MEMORY Load 38 EnPress / to select Load and then press Playback Remote control operationsSelecting the input source 39 En40 En Playing back sourcesPress Mute on the remote control to mute the sound Adjusting the volumeMuting the sound 41 EnEnjoying Surround Sound Press 5BEAM on the remote control to select the 5 beamBeam 42 EnPress 3BEAM on the remote control to select the 3 beam Stereo plus 3 beam Beam43 En Status Indicator Decoder indicators44 En Surround modes and recommended sourcesEnjoying 2-channel sources Surround sound45 En When Dolby Pro Logic II Music is selected Adjusting surround mode parametersWhen DTS Neo6 Music is selected 46 EnEnjoying Stereo Sound Stereo playback47 En Using auto-adjust function 48 EnMy beam microphone Press MY Beam on the remote control Using manual-adjust functionPress / while MY Beam is displayed to adjust the angle 49 EnWhat is a sound field? Using Sound Field Programs50 En Elements of a sound field51 En Sound field program descriptions52 En Music programsMovie programs Sports program 53 En54 En Press / on the remote control55 En Using the Volume ModeEffect.LvlMIN Effect.LvlMID Effect.LvlMAX 56 En57 En Press on the remote controlSetting the sleep timer Using the Sleep TimerUnit to confirm the setting for the sleep timer 58 EnCanceling the sleep timer 59 EnDisappears 60 En Manual SetupPress / to select Manual Setup and then press Enter Using Manual SetupPress / / / and Enter to configure each parameter 61 EnInstalled Position Installed position of this unit Setting parameters2BEAM Menu 62 EnBeam Adjustment Beam adjustment Bbeam AdjustmentInstalled Height Installed height of this unit 63 EnHorizontal Angle Horizontal angle 64 EnVertical Angle Vertical angle Beam Travel Length Beam travel lengthFocal Length Focal length 65 EnTreble Gain Treble gain Front left channelCimage Location 1SOUND Menu66 En Image Location Image locationBsubwoofer SET Daudio DelayCmute Level Eroom EQAinput Assignment 1/4 Input MenuAinput Assignment 2/4 68 EnAinput Assignment 3/4 Binput ModeAinput Assignment 4/4 Cinput TrimDinput Rename Dimmer SET Dimmer settingsAdimmer SET 70 EnUnit SET Unit settings OSD SET OSD settingsBosd SET Cunit SETUsing the test tone Adjusting the Audio BalancePress / to select the channel you want to adjust 72 EnUsing the audio output being player back Press Test when you have completed all your adjustments73 En 74 En 75 En Selecting the Input ModeAuto DTSSetting the Memory Protect Adjusting System Parameters76 En Release Input on the front panelPress / to switch between Protect on Protect OFF Setting the MAX VolumePress / to adjust the maximum volume level 77 EnSetting the Demo Mode Setting the Turn on VolumePress / to adjust the initial volume level 78 EnSetting the Factory Preset Press / to switch between Demo on Demo OFF79 En 80 En Press / to switch between Preset Reset and Preset CancelSetting remote control codes Remote Control Features81 En Code SET82 En Controlling other componentsOperating your TV Operating your DVD player83 En Operating your VCR Operating your STB CATV/Satellite tunerOperation buttons for DVD and VCR Using the TV macro Setting macros for the TV with the tuning capability84 En Canceling the macros Setting macros for the TV without the tuning capability85 En Operating macrosTroubleshooting 86 EnGeneral 87 En 88 En Remote controlAudio formats GlossaryAudio information 89 En90 En Index91 En SpecificationsAMP Section Speaker SectionDVD Player Cable TV TunerVCR 834 Satellite TunerAll rights reserved On the upper shelf to keep it away from the floor Cables used for connectionsEnjoying surround sound