Yamaha YSP-1100 owner manual 1SOUND Menu, Cimage Location, 66 En, Image Location Image location

MANUAL SETUP

■IMAGE LOCATION (Image location)

Use to adjust the direction from which the front left and right channel sound is heard so that the each sound can be heard closer to the center channel.

Use this feature to redirect audio signals if the sound coming from the front left and right seems unnatural, such as when your listening position is not the center of your listening room.

You can only adjust this parameter when 3 beam or 5 beam is selected as the beam mode (see page 42). Choices: ON, OFF

Setting range: 0% to 95%

Initial setting: 0%

SOUND MENU

Use to manually adjust various parameters related to the sound output.

SET MENU → MANUAL SETUP → SOUND MENU

1)SOUND MENU

. A)TONE CONTROL B)SUBWOOFER SET C)MUTE LEVEL D)AUDIO DELAY E)ROOM EQ

F)DD/DTS Dynamic Range

[p]/[p]:Up/Down [ENTER]:Enter

C)IMAGE LOCATION

.	OFF		)ON
	L	C	R

p

LEFT;;;;;;;;;;;0%

RIGHT;;;;;;;;;;0%

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

LEFT (Left)

Adjusts audio signals towards the left.

The higher the percentage, the louder the output from the center.

Without adjustment	With the front left
	channel adjusted

RIGHT (Right)

Adjusts audio signals towards the right.

The higher the percentage, the louder the output from the center.

	With the front right
Without adjustment	channel adjusted

■TONE CONTROL (Tone control)

You can adjust the tonal quality of the sound beams.

A)TONE CONTROL
-	+
. TREBLE;;;;;0dB	------
-	+
BASS;;;;;;;0dB	------
[p]/[p]:Up/Down [p]/[p]:Sel
[ENTER]:Return

TREBLE (Treble)

Use to adjust the high frequency response. Choices: –12 dB to +12 dB

Initial setting: 0 dB

BASS (Bass)

Use to adjust the low frequency response. Choices: –12 dB to +12 dB

Initial setting: 0 dB

66 En