Yamaha YSP-1100 owner manual Connecting a TV, 16 En, Audio connections Video connections

Page 20

CONNECTIONS

Connecting a TV

Connect a TV to this unit and display the OSD for easy viewing when you adjust the system parameters in SET MENU.

■ Audio connections

■ Video connections

Connect the analog audio output jacks of your TV to the TV/STB AUDIO IN jacks of this unit. If your TV has an optical digital output jack, connect the optical digital output jack of your TV to the TV/STB OPTICAL DIGITAL IN jack of this unit in addition to the analog audio connection. Once the digital audio connection is made, digital audio signals can be input to this unit during digital broadcasting.

y

Connect the video input jacks of your TV to the VIDEO OUT jacks of this unit. If your TV has component video input jacks, connect the component video input jacks of your TV to the COMPONENT VIDEO OUT jacks of this unit in addition to the composite video connection. Once the component video connection is made, you can enjoy images with better resolution.

•The circuits of composite and component video signals are independent of each other.

•To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 15).

Note

If you connect this unit to the analog audio and optical digital audio output jacks at the same time as shown in the left illustration below, the digital audio signals output at the optical digital output jack take priority over the analog audio signals output at the analog audio output jacks.

TV

Optical digital	Analog audio	Video	Component
output	output	input	video input

R L

Remove the caps if

attached

Check the direction

Rear panel of this unit

RS-232C			REMOTE IN





	DVD		AUX TV/STB
	COAXIAL		OPTICAL
	COAXIAL		OPTICAL
		DIGITAL IN
		DIGITAL IN

TV/STB VCR

AUDIO IN

	COMPONENT	COMPONENT	COMPONENT
VCR	DVD/AUX	STB
SUBWOOFER	VIDEO IN		VIDEO OUT

Cables used for audio connections

Audio pin cable (supplied)

(White)

(Red)

Optical cable (supplied)

Cables used for video connections

Video pin cable (supplied)

(White)

(Yellow)

(Red)

Component video pin cable

(Green)

(Blue)

(Red)

(Yellow)

(Green)

(Blue)

(Red)

16 En

Image 20

Contents YSP-1100 Important Safety Instructions Explanation of Graphical SymbolsFCC Information for US customers Ii EnIii En For Canadian CustomersContents Overview Features Using this Manual Supplied Accessories Remote control ⋅1Yellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1 Cable clamp ⋅1 White/Red Fasteners ⋅4Controls and Functions Front panelInput STANDBY/ONFront panel display Rear panel Remote control 10 En Installation Before installing this unitInstalling this unit 11 EnExample Installation examples12 En Using a metal wall bracket Using a standUsing a TV stand Using a rackFasteners 14 EnAffixing this unit Connections 15 EnFor audio input For video input For video outputConnecting a TV 16 EnAudio connections Video connections Cables used for audio connectionsDVD player/recorder Connecting a DVD player/recorder17 En Connecting a VCR 18 EnAudio connections VideoConnecting a digital satellite tuner or a cable TV tuner 19 EnDigital airwave tuner Connecting a digital airwave tuner20 En Connecting other external components 21 EnCables used for connections CD player, etc Optical digital OutputSubwoofer Monaural Input Rear panel of this unit Connecting a subwoofer22 En Connecting the power supply cable About the RS-232C/REMOTE IN/IR-OUT terminals23 En To the AC outletInstalling batteries in the remote control Operation range of the remote controlClose the battery cover Getting StartedUsing the remote control Turning on the power Operational buttons only when YSP is Selected25 En Function-varying buttonsUsing SET Menu Displaying the OSD26 En OSD screen exampleFlow chart of SET Menu 27 EnLanguage Setup Press Menu on the remote controlPress / to select Language Setup and then press Enter Changing OSD LanguageFlow chart of Auto Setup 29 EnInstalling the optimizer microphone 30 EnUsing Auto Setup IntelliBeam 31 EnAssembling the supplied cardboard Microphone stand Center lineAuto Setup 32 EnBEAM+SOUND Optimz Auto Setup Start33 En Show Result 34 EnSide view ExampleError messages for Auto Setup Before the Auto Setup procedure startsWhile the Auto Setup procedure is in progress 35 EnUsing the System Memory Saving settingsConvenient usage of the system memory 36 EnLoading settings SET Menu37 En Press Enter againPress / to select Load and then press 1MEMORY Load38 En Remote control operations PlaybackSelecting the input source 39 EnPlaying back sources 40 EnAdjusting the volume Press Mute on the remote control to mute the soundMuting the sound 41 EnPress 5BEAM on the remote control to select the 5 beam Enjoying Surround SoundBeam 42 En43 En Press 3BEAM on the remote control to select the 3 beamStereo plus 3 beam Beam Decoder indicators Status Indicator44 En Surround modes and recommended sources45 En Enjoying 2-channel sourcesSurround sound Adjusting surround mode parameters When Dolby Pro Logic II Music is selectedWhen DTS Neo6 Music is selected 46 En47 En Enjoying Stereo SoundStereo playback My beam microphone Using auto-adjust function48 En Using manual-adjust function Press MY Beam on the remote controlPress / while MY Beam is displayed to adjust the angle 49 EnUsing Sound Field Programs What is a sound field?50 En Elements of a sound fieldSound field program descriptions 51 EnMovie programs 52 EnMusic programs 53 En Sports programPress / on the remote control 54 EnUsing the Volume Mode 55 En56 En Effect.LvlMIN Effect.LvlMID Effect.LvlMAXPress on the remote control 57 EnUsing the Sleep Timer Setting the sleep timerUnit to confirm the setting for the sleep timer 58 EnDisappears Canceling the sleep timer59 En Manual Setup 60 EnUsing Manual Setup Press / to select Manual Setup and then press EnterPress / / / and Enter to configure each parameter 61 EnSetting parameters Installed Position Installed position of this unit2BEAM Menu 62 EnBbeam Adjustment Beam Adjustment Beam adjustmentInstalled Height Installed height of this unit 63 En64 En Horizontal Angle Horizontal angleVertical Angle Vertical angle Beam Travel Length Beam travel length65 En Focal Length Focal lengthTreble Gain Treble gain Front left channel1SOUND Menu Cimage Location66 En Image Location Image locationDaudio Delay Bsubwoofer SETCmute Level Eroom EQInput Menu Ainput Assignment 1/4Ainput Assignment 2/4 68 EnBinput Mode Ainput Assignment 3/4Ainput Assignment 4/4 Cinput TrimDimmer SET Dimmer settings Dinput RenameAdimmer SET 70 EnOSD SET OSD settings Unit SET Unit settingsBosd SET Cunit SETAdjusting the Audio Balance Using the test tonePress / to select the channel you want to adjust 72 En73 En Using the audio output being player backPress Test when you have completed all your adjustments 74 En Selecting the Input Mode 75 EnAuto DTSAdjusting System Parameters Setting the Memory Protect76 En Release Input on the front panelSetting the MAX Volume Press / to switch between Protect on Protect OFFPress / to adjust the maximum volume level 77 EnSetting the Turn on Volume Setting the Demo ModePress / to adjust the initial volume level 78 En79 En Setting the Factory PresetPress / to switch between Demo on Demo OFF Press / to switch between Preset Reset and Preset Cancel 80 EnRemote Control Features Setting remote control codes81 En Code SETControlling other components 82 EnOperating your TV Operating your DVD playerOperation buttons for DVD and VCR 83 EnOperating your VCR Operating your STB CATV/Satellite tuner 84 En Using the TV macroSetting macros for the TV with the tuning capability Setting macros for the TV without the tuning capability Canceling the macros85 En Operating macrosGeneral Troubleshooting86 En 87 En Remote control 88 EnGlossary Audio formatsAudio information 89 EnIndex 90 EnSpecifications 91 EnAMP Section Speaker SectionVCR DVD PlayerCable TV Tuner Satellite Tuner 834All rights reserved Cables used for connections On the upper shelf to keep it away from the floorEnjoying surround sound