Yamaha YSP-1100 owner manual 2BEAM Menu, 62 En, Setting parameters

Page 66

MANUAL SETUP

BEAM MENU

Use to manually adjust various parameters related to the sound beam output.

SET MENU → MANUAL SETUP → BEAM MENU

2)BEAM MENU

. A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION

•Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit and the distance of the center of this unit from the left wall.

Listening position from the left wall

[p]/[p]:Up/Down [ENTER]:Enter

y

You can adjust the sound beam output level of each channel in

Room length

Listening position from the unit

“ADJUSTING THE AUDIO BALANCE” (see page 72).

■SETTING PARAMETERS

(Setting parameters)

Use to set the position of this unit in your listening room and the distance of this unit from the listening position. When you make settings for each parameter, other related parameters are automatically adjusted to best match your listening environment.

Note

If you make adjustments in SETTING PARAMETERS, the beam optimization settings made in the AUTO SETUP procedure will be lost. If you want to keep the beam optimization settings made in the AUTO SETUP and make further adjustments, adjust settings in BEAM ADJUSTMENT first (see page 63).

Room width

Choices for the room width and length: 2.0 m to 12.0 m

Choices for the listening position from this unit: 1.8 m to 9.0 m

Choices for the listening position from the left wall: 0.6 m to 11.4 m

	A)SETTING PARAMETERS 2/3

Room width and length		-------[ 5.4m ]-
Room width and length
		4.9m

	[p]/[p]:Up/Down [p]/[p]:Sel
		[ENTER]:Return

A)SETTING PARAMETERS 1/3

. INSTALLED POSITION

;;;;;FLAT TO WALL

INSTALLED HEIGHT;;;;1.0m

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

INSTALLED POSITION (Installed position of this unit)

Use to adjust the installed position of this unit.

Choices: FLAT TO WALL (Parallel to wall installation),

ANGLE TO WALL OR CORNER (Corner installation)

FLAT TO WALL				ANGLE TO WALL
FLAT TO WALL				OR CORNER

	A)SETTING PARAMETERS 3/3
Listening position from the		--------
unit and the left wall		2.7m [ 2.5m ]
unit and the left wall



	[p]/[p]:Up/Down [p]/[p]:Sel
		[ENTER]:Return

62 En

Image 66

Contents YSP-1100 Important Safety Instructions Explanation of Graphical SymbolsFCC Information for US customers Ii EnIii En For Canadian CustomersContents Overview Features Using this Manual Yellow Optimizer microphone ⋅1 Orange Audio pin cable ⋅1 Supplied AccessoriesRemote control ⋅1 Cable clamp ⋅1 White/Red Fasteners ⋅4Input Controls and FunctionsFront panel STANDBY/ONFront panel display Rear panel Remote control 10 En Installing this unit InstallationBefore installing this unit 11 EnInstallation examples 12 EnExample Using a TV stand Using a metal wall bracketUsing a stand Using a rack14 En Affixing this unitFasteners For audio input For video input Connections15 En For video outputAudio connections Video connections Connecting a TV16 En Cables used for audio connectionsConnecting a DVD player/recorder 17 EnDVD player/recorder Audio connections Connecting a VCR18 En VideoConnecting a digital satellite tuner or a cable TV tuner 19 EnConnecting a digital airwave tuner 20 EnDigital airwave tuner Cables used for connections Connecting other external components21 En CD player, etc Optical digital OutputConnecting a subwoofer 22 EnSubwoofer Monaural Input Rear panel of this unit 23 En Connecting the power supply cableAbout the RS-232C/REMOTE IN/IR-OUT terminals To the AC outletClose the battery cover Installing batteries in the remote controlOperation range of the remote control Getting Started25 En Using the remote control Turning on the powerOperational buttons only when YSP is Selected Function-varying buttons26 En Using SET MenuDisplaying the OSD OSD screen exampleFlow chart of SET Menu 27 EnPress / to select Language Setup and then press Enter Language SetupPress Menu on the remote control Changing OSD LanguageFlow chart of Auto Setup 29 EnInstalling the optimizer microphone 30 EnAssembling the supplied cardboard Microphone stand Using Auto Setup IntelliBeam31 En Center lineAuto Setup 32 EnAuto Setup Start 33 EnBEAM+SOUND Optimz Side view Show Result34 En ExampleWhile the Auto Setup procedure is in progress Error messages for Auto SetupBefore the Auto Setup procedure starts 35 EnConvenient usage of the system memory Using the System MemorySaving settings 36 En37 En Loading settingsSET Menu Press Enter again1MEMORY Load 38 EnPress / to select Load and then press Selecting the input source Remote control operationsPlayback 39 EnPlaying back sources 40 EnMuting the sound Adjusting the volumePress Mute on the remote control to mute the sound 41 EnBeam Press 5BEAM on the remote control to select the 5 beamEnjoying Surround Sound 42 EnPress 3BEAM on the remote control to select the 3 beam Stereo plus 3 beam Beam43 En 44 En Decoder indicatorsStatus Indicator Surround modes and recommended sourcesEnjoying 2-channel sources Surround sound45 En When DTS Neo6 Music is selected Adjusting surround mode parametersWhen Dolby Pro Logic II Music is selected 46 EnEnjoying Stereo Sound Stereo playback47 En Using auto-adjust function 48 EnMy beam microphone Press / while MY Beam is displayed to adjust the angle Using manual-adjust functionPress MY Beam on the remote control 49 En50 En Using Sound Field ProgramsWhat is a sound field? Elements of a sound fieldSound field program descriptions 51 En52 En Music programsMovie programs 53 En Sports programPress / on the remote control 54 EnUsing the Volume Mode 55 En56 En Effect.LvlMIN Effect.LvlMID Effect.LvlMAXPress on the remote control 57 EnUnit to confirm the setting for the sleep timer Using the Sleep TimerSetting the sleep timer 58 EnCanceling the sleep timer 59 EnDisappears Manual Setup 60 EnPress / / / and Enter to configure each parameter Using Manual SetupPress / to select Manual Setup and then press Enter 61 En2BEAM Menu Setting parametersInstalled Position Installed position of this unit 62 EnInstalled Height Installed height of this unit Bbeam AdjustmentBeam Adjustment Beam adjustment 63 EnVertical Angle Vertical angle 64 EnHorizontal Angle Horizontal angle Beam Travel Length Beam travel lengthTreble Gain Treble gain 65 EnFocal Length Focal length Front left channel66 En 1SOUND MenuCimage Location Image Location Image locationCmute Level Daudio DelayBsubwoofer SET Eroom EQAinput Assignment 2/4 Input MenuAinput Assignment 1/4 68 EnAinput Assignment 4/4 Binput ModeAinput Assignment 3/4 Cinput TrimAdimmer SET Dimmer SET Dimmer settingsDinput Rename 70 EnBosd SET OSD SET OSD settingsUnit SET Unit settings Cunit SETPress / to select the channel you want to adjust Adjusting the Audio BalanceUsing the test tone 72 EnUsing the audio output being player back Press Test when you have completed all your adjustments73 En 74 En Auto Selecting the Input Mode75 En DTS76 En Adjusting System ParametersSetting the Memory Protect Release Input on the front panelPress / to adjust the maximum volume level Setting the MAX VolumePress / to switch between Protect on Protect OFF 77 EnPress / to adjust the initial volume level Setting the Turn on VolumeSetting the Demo Mode 78 EnSetting the Factory Preset Press / to switch between Demo on Demo OFF79 En Press / to switch between Preset Reset and Preset Cancel 80 En81 En Remote Control FeaturesSetting remote control codes Code SETOperating your TV Controlling other components82 En Operating your DVD player83 En Operating your VCR Operating your STB CATV/Satellite tunerOperation buttons for DVD and VCR Using the TV macro Setting macros for the TV with the tuning capability84 En 85 En Setting macros for the TV without the tuning capabilityCanceling the macros Operating macrosTroubleshooting 86 EnGeneral 87 En Remote control 88 EnAudio information GlossaryAudio formats 89 EnIndex 90 EnAMP Section Specifications91 En Speaker SectionDVD Player Cable TV TunerVCR Satellite Tuner 834All rights reserved Cables used for connections On the upper shelf to keep it away from the floorEnjoying surround sound