Yamaha YSP-1100 Bosd SET, Cunit SET, 71 En, OSD SET OSD settings, Unit SET Unit settings

■OSD SET (OSD settings)

Use to adjust the display position and the background color of the OSD.

B)OSD SET

. OSD SHIFT;;;;;;;;0

OSD BACK COLOR;;;BLUE

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

OSD SHIFT (OSD shift)

Use to adjust the vertical position of the OSD. Adjust towards the – (minus) direction to raise the position of the OSD, and adjust towards the + (plus) direction to lower it. Choices: –5 to +5

Initial setting: 0

OSD BACK COLOR (OSD background color)

Use to select the background color of the OSD. Choices: BLUE, GRAY

■UNIT SET (Unit settings)

Use this to change the display unit of measurement. Choices: METERS (Australia and U.K. models),

FEET (U.S.A. model)

C)UNIT SET

pMETERS FEET

[p]/[p]:Select [ENTER]:Return

•Select METERS to input distances in meters.

•Select FEET to input distances in feet.

Note

If you change this setting, the adjusted beam settings may change.

MANUAL SETUP

OPERATION ADVANCED

English

71 En