PLAYING BACK SOUND CLEARLY (My beam)
You can improve listenability in a noisy environment by changing the beam mode to the my beam, outputs sound beams directly to the listening position in a single channel. In addition, the my beam is also ideal if you do not want the sound beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or movies at night.
My beam 
microphone
STANDBY/ON | POWER POWER | |
| AV | TV |
5BEAM | ST+3BEAM | 3BEAM |
1 | 2 | 3 |
STEREO | MY BEAM SURROUND | |
4 | 5 | 6 |
MUSIC | MOVIE | SPORTS |
7 | 8 | 9 |
OFF |
|
|
0 | +10 |
|
CH LEVEL |
| MENU |
| ENTER | TV/AV |
| YSP | |
|
| |
TEST |
| RETURN |
Note
If the my beam is selected as the beam mode, the surround modes (see page 44), the CINEMA DSP programs (see page 50) and the TruBass (see page 57) become ineffective. In addition, no audio is output from the subwoofer connected to this unit.
Using auto-adjust function
The my beam microphone on the remote control collects the test tones from this unit, and then the beam angle is automatically adjusted.
1Set the operation mode selector to YSP to switch to the operation mode of this unit.
TV/AV
YSP
Notes
•If an error occurs, an error buzzer is played and MY BEAM ERROR is displayed on the front panel display.
•An error may occur if the listening room is noisy. Make sure that the listening room is as quiet as possible during the test tones are being output.
•Do not shake or move the remote control during the test tones are being output.
•Do not cover the my beam microphone on the remote control during the test tones are being output.
•The batteries in the remote control may be week if the remote control does not function properly. In such case, replace all the batteries and then try the procedure again.
2Press and hold MY BEAM on the remote control more than 2 seconds.
A test tone is output twice from this unit. Keep pointing the remote control toward this unit during the test tones are being output so that the my beam microphone can collect the test tones.
Control range: L50° to R50°
Operation guarantee range: 6 m, L30° to R30°
MY BEAM
5