Yamaha YSP-1100 owner manual Using the audio output being player back, 73 En

5Press TEST when you have completed all your adjustments.

TEST

Notes

•All the channel levels cannot be adjusted when the stereo playback or my beam is selected as the beam mode (see pages 47 and 48).

•FRONT L/R cannot be adjusted when the stereo plus 3 beam is selected as the beam mode (see page 43).

•FRONT L/R are automatically adjusted depending on the settings of the other channels when the stereo plus 3 beam or stereo playback is selected as the beam mode (see pages 43 and 47).

y

If the level of a particular channel cannot be adjusted, – –dB appears in the front panel display.

ADJUSTING THE AUDIO BALANCE

Using the audio output being player back

You can also manually adjust the channel levels while playing back an input source such as a DVD.

OFF

0 +10

CH LEVEL MENU

TV/AV

ENTER

YSP

TESTRETURN

1Set the operation mode selector to YSP to switch to the operation mode of this unit.

TV/AV

YSP

2Press CH LEVEL repeatedly (or press CH LEVEL and then / ) to select the channel you want to adjust.

The front panel display changes as follows.

CH LEVEL

or

CH LEVEL

ENTER

OPERATION ADVANCED

FRONT L +1.0dB

CENTER -2.5dB

FRONT R +1.0dB

SUR.R +2.0dB

SUR.L +2.0dB

SWFR --dB

English

73 En