Sending a Fax Message
Note
❒If the CIL is added, the following information is printed on all pages:
•The receiver's own number and
ID
•The sender's (i.e. this machine's)
| own number and ID | |
2 | ||
• The communication time | ||
|
Skip Transmission
This feature requires the optional Func- tion Upgrade Card.
By storing the scan area beforehand, only the designated area of the docu- ment page will be scanned and sent.
• Page number |
❒ By default, TTI/CIL Print is turned on when the machine is shipped. For how to change this setting, seeP.236 “Changing the User Param- eters”.
ID Transmission
A Skip Length
B Scan Length
C
Transmitter
(This machine)
Receiver
B
GFSKPS0N
If you use this feature, transmission is limited to destination machines of the same make and with the same stored Polling ID. This is useful when send- ing documents containing confiden- tial or sensitive information.
Preparation
You need to program the Polling ID beforehand.⇒ P.250 “Register- ing ID Codes”
Limitation
❒ID Transmission is not available with the following functions:
•Polling Transmission (⇒ P.120)
•Backup Transmission (⇒ P.85)
Note
❒When the machine is shipped, this feature is turned off by default. Turn in on or off with the User Pa- rameters.
Preparation
You need to store the Skip Trans- mission feature in a User Function key beforehand.
Limitation
❒You can only store one scan area.
❒Skip Transmission is not available with the following features:
•Immediate Transmission (⇒ P.55)
•On Hook Dial Transmission (⇒ P.59)
•Manual Dial Transmission (⇒ P.61)
•Parallel Memory Transmission (⇒ P.49)
Note
❒Transmission time is shorter com- pared to sending the whole page. This feature is useful, for example, when you do not need to send the whole page, or when the page con- tains confidential information.
84