Memory Transmission
can check the result of the transmis- sion. If two or more destinations are specified, this report is printed after the fax message has been sent to all the destinations. If the machine is set up not to print this report and the fax message could not be successfully transmitted, the Communication Fail-
ure Report is printed.⇒ P.51 “Com-2 munication Failure Report”
Note
❒By default this function is turned on so you need to turn it off.⇒ P.236 “Changing the User Parame- ters”
❒You can choose whether to include part of the document image on the
report (by default, part of the im- age is printed).⇒ P.236 “Changing the User Parameters”
Communication Failure Report
This report is only printed if the Com- munication Result Report is turned off and a message could not be suc- cessfully transmitted with Memory Transmission. Use it to keep a record of failed transmissions so you can send them again.
Note
❒You can choose whether to include part of the document image on the
report (by default, part of the im- age is printed).⇒ P.236 “Changing the User Parameters”
51