Savin 9980, 3699 manual On-Hook Dial, Using On Hook Dial with Isdn, Press the On Hook Dial key

On-Hook Dial

On-Hook Dial

This is just like using a connected op- tional handset or external telephone, except you do not have to pick up the handset before dialing. Just press the {On Hook Dial} key and dial the num- ber. If you hear a voice, you can pick up the external telephone and speak with the other party.

Limitation

❒This feature is not available in some countries.

❒You cannot use this feature with the optional G3 unit.

Note

❒You can dial with the number keys, Quick Dials or Speed Dials.

Reference

P.231 “Monitor Volume”

ASet your document and select any scan settings you require.

Reference

P.35 “How to Set a Document”

P.62 “Scan Settings”

BPress the {On Hook Dial} key.

You will hear a low tone from the internal speaker. If you wish to cancel this operation, press the {On Hook Dial}key again.

CDial.

2

The machine dials each digit as

you enter it. If you make a mistake, press the {Stop}key, {On Hook Dial} or {Clear Modes/Energy Saver} key and return to step B.

DWhen a connection is made to an- other fax machine (you will hear a high-pitched tone), press the {Start} key.

•If you hear a voice, pick up the

external handset before you press the {Start} key and notify the destination that you want to send a fax message (ask them to switch to Fax mode).

•After transmission the machine will return to standby mode.

Note

❒If you wish to cancel transmis- sion while it is in progress, press the {Stop} key then remove the document.

Using On Hook Dial with ISDN

This feature requires the optional G4 Unit.

59