Setup
5
6
For replacement only
Remove the stoppers and tags from the new ink film. Find the “T” shaped gear (blue).
Insert the blue core of the front ink film roll into the right slot of the unit (#). Insert the “T” shaped gear (blue) into the left slot of the unit ($).
Insert the rear ink film roll (%).
Tags
Stopper
New ink film |
|
“T” shaped gear (blue) | Stopper |
|
“T” shaped
gear (blue)
Rear ink film roll
2 | 3 | Right | |
slot | |||
|
| ||
Left |
|
| |
slot |
| 1 | |
|
| ||
Front ink |
| Blue core | |
film roll |
|
|
Turn the “T” shaped gear (blue) in the | “T” shaped gear (blue) | ||
7 direction of the arrow. | |||
| |||
● Make sure that the ink film is |
| ||
wrapped around the blue core |
| ||
at least once. |
| ||
Correct | Incorrect |
|
Tight
The ink film is not wrapped
Blue core
around the blue core.
Slack Reverse
Ink film
8 Close the back cover securely by pushing down on the dotted area at both ends (#). Close the front cover securely ($).
●The following will be displayed while the unit is checking that there is no slack in the ink film.
Dotted area
1
2
| Display: | PLEASE WAIT |
|
| |
Note: |
| Front cover |
| ||
● | The ink film is completely safe to touch, and will not | Back cover | |||
| |||||
| rub off on your hands like carbon paper. |
| Display |
14