3. Telephone
3.9.2Erasing specific caller information
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired entry.
3Press {<}.
LTo cancel erasing, press {STOP} 2 times.
4Press {SET}.
LTo erase other entries, repeat steps 2 to 4.
5Press {STOP} to exit the program.
Note:
LTelstra, Optus, Telecom New Zealand and TelstraClear do not currently send caller name information.
3.10Storing caller information
Important:
LThis feature is not available in the following cases.
–The telephone number includes data other than numbers (i.e., * or #).
–The caller information does not include a telephone number.
LKeep the front cover page open for button locations.
1Press {CALLER ID SEARCH}.
2Press {A} or {B} repeatedly to display the desired entry.
3Press {DIRECTORY PROGRAM}.
4Select the station key or navigator directory.
For stations
1.Press the desired station key.
2.Press {SET}.
3.Press {SET}.
For stations
1.Press the desired station key.
2.Press {SET}.
For stations
1.Press {LOWER}, then press the desired station key.
2.Press {SET}.
For navigator directory:
1.Press {<} or {>}.
2.Press {SET}.
5Press {SET}.
Note:
LYou can confirm the stored entries in the telephone number list (page 55).
LThe unit can only store a name of up to 10
characters long.
LTo edit a name or number, see page 22.
LIf you enter a new entry into a station key, the previous entry will be replaced.
LIf you use stations
stations
LTelstra, Optus, Telecom New Zealand and TelstraClear do not currently send caller name information.
25