Panasonic KX-FL511AL manual Direct commands for programming features, Programmable Features

Page 42
7.4Direct commands for programming features

7. Programmable Features

fax tone, ring back tone and busy tone. You can use those tones to confirm the status of the other party’s machine.

LIf the ring back tone continues, the other party’s machine may not be a facsimile or may have run out of paper. Check with the other party.

LThe connecting tone volume cannot be adjusted.

“ON” (default): You will hear connecting tones.

“OFF”: Deactivates this feature.

Code #79: Setting toner save feature

TONER SAVE

=OFF [±]

“ON”: The toner cartridge will last longer.

“OFF” (default): Deactivates this feature.

Code #80: Resetting advanced features to their default settings

SET DEFAULT

RESET=NO [±]

To reset the advanced features:

1.Press {MENU}.

2.Press {#}, then {8}{0}.

3.Press {A} or {B} repeatedly to select “YES”.

4.Press {SET}.

5.Press {SET} again.

6.Press {MENU}.

LThe location setting (feature #74, page 39) will not be reset.

7.4Direct commands for programming features

You can also select the desired setting by directly entering the program code (# and a 2-digit number) and direct command.

1Press {MENU}.

2Press {#} and the 2-digit code number.

3Press the desired direct command, using the dial keypad, to display the desired setting. L This step may be slightly different

depending on the feature.

4Press {SET}.

5To exit programming, press {MENU}.

Program code and direct command key

{#}{0}{1} Date and time

LEnter the date and time using the dial keypad (see page 18 for details).

{#}{0}{2} Your logo

LEnter your logo using the dial keypad (see page 19 for details).

{#}{0}{3} Your fax number

LEnter your fax number using the dial keypad (see page 20 for details).

{#}{0}{4} Sending report

–{1}:“ON”

–{2}:“OFF”

–{3}:“ERROR” (default)

{#}{0}{6} Fax ring count

–{2}:“2” (default)

–{3}:“3”

–{4}:“4”

–{5}:“5”

–{6}:“6”

–{7}:“7”

–{8}:“8”

–{9}:“9”

{#}{1}{2} Remote activation ID

–{1}:“ON”

–{2}:“OFF” (default)

LIf you select “ON”, then enter your ID from 1 to 5 digits using 0-9, * and #.

{#}{1}{3} Dialling mode

–{1}:“PULSE”

–{2}:“TONE” (default)

{#}{1}{7} Ringer pattern

–{1}:“A” (default)

–{2}:“B”

–{3}:“C”

{#}{2}{2} Journal report

–{1}:“ON” (default)

–{2}:“OFF”

{#}{2}{3} Overseas mode

–{1}:“NEXT FAX”

–{2}:“OFF”

–{3}:“ERROR” (default)

{#}{2}{5} Delayed transmission

–{1}:“ON”

–{2}:“OFF” (default)

LIf you select “ON”, then enter the fax number and transmission time using the dial keypad (see feature #25 on page 38 for details).

{#}{2}{6} Caller ID list

–{1}:“ON” (default)

–{2}:“OFF”

40

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Model No. KX-FL511AL Operating InstructionsHigh Speed Laser Fax with Copier Function This model is designed to be used in Australia and New ZealandHow to use the operating instructions OPENI J K L M N O P Location of controlsD E F G H Q R S T UThings you should keep a record of Attach your sales receipt hereFor Australian users For New Zealand usersIMPORTANT NOTICE Important information for Australian users Instructions to customerINSTALLATION Important safety instructionsSafety Instructions SAVE THESE INSTRUCTIONSLaser radiation OTHER INFORMATIONFOR BEST PERFORMANCE Fuser unit1. Introduction and 1.1 Included accessories 1. Introduction and Installation1.2 Accessory information 1.3 Description of buttons1.2.1 Available accessories 1.4 Overview 1 2 3 4 5 7 8 9 j k l1.5 Toner cartridge and drum unit Toner save feature 1.6 Paper tray 1.7 Paper stacker1.8 Document stacker 1.9 Handset cord1.10 Recording paper L The paper should not be over the tabs CorrectIncorrect 2.1 Connections 2. Preparation2.3.1 Ringer volume 2.3 Adjusting volume2.2 Help function 2.3.2 Handset receiver volume2.4 Date and time 2.5 Your logo RECALL AB SET2.6 Your fax number RECALLPress *64#9#1234 3.1 Storing names and telephone numbers into one-touch dial 3.2 Storing names and telephone numbers into the navigator directory3. Telephone 3.4 Erasing a stored entry 3.5 Making a phone call using one-touch dial and navigator directory3.3 Editing a stored entry 3.5.1 Using one-touch dial3.6 Caller ID service 3.7 Viewing and calling back using caller information3.6.1 How Caller ID is displayed 3.7.1 Editing a caller’s telephone number before calling back 3.8 Printing the Caller ID list3.9 Erasing caller information 3.9.1 Erasing all caller information3.10 Storing caller information 3.9.2 Erasing specific caller information4.1 Sending a fax manually 4. FaxDocument weight 4.3 Sending a fax using one touch dial and navigator directory4.2 Documents you can send 3. Press QUICK SCAN START or FAX START4.4 Broadcast transmission 4.4.1 Programming entries into the broadcast memory4.4.2 Adding a new entry into the broadcast memory 4.4.3 Erasing a stored entry from the broadcast memory 4.4.4 Sending the same document to pre-programmed parties4.5.2 Mostly phone calls 4.5 Selecting the way to use your fax machine4.5.1 Use only as a fax 4.5.3 With answering machine4.6.1 Activating TEL mode 4.6 Receiving a fax manually4.7 Receiving a fax automatically 4.7.1 Activating FAX ONLY mode4.8 Using the unit with an answering machine 4.9 Receive polling retrieving a fax placed on another fax machine4.8.1 Setting up the fax machine and an answering machine 4.10.1 Activating the junk fax prohibitor 4.10.2 Programming undesired callersLIGHT 5.1 Using with the ring detection feature 5. Distinctive Ring6.1 Making a copy 6.1.1 More copying features6. Copy L After copying, the collating feature will turn OFF automatically Example Making 2 copies of a 4-page original document7.1.1 Programming basic features 7.2 Basic features7.1 Programming 7.1.2 Programming advanced featuresCode #13 Setting the dialling mode For Australian users only 7.3 Advanced featuresCode #06 Changing the ring setting in FAX ONLY mode Code #17 Setting the ringer patternCode #31 Activating the Distinctive Ring feature 7.4 Direct commands for programming features #31 Distinctive Ring 8.1 Error messages - Reports 8.2 Error messages - Display8. Help L The inside of the unit is extremely cold and cannot be operated. Use the unit in a warmer area. While the unit cannot be operated, the received documents are temporarily stored into the memory, and will be printed out automatically when the unit warms up 8.3 When a function does not work, check here 8.3.1 General8.3.2 Fax - sending 8.3.3 Fax - receiving 8.3.4 CopyingA B C 8.3.5 Using an answering machine 8.3.6 If a power failure occurs8.4 Replacing the toner cartridge and the drum unit TONER LOW TONER EMPTYL If you replace the toner cartridge and the drum unit at the same time, skip to step 8.5 Recording paper jam 8.5.1 When the recording paper has jammed in the unitWhen the recording paper has jammed near the drum and toner unit When the recording paper has jammed near the recording paper exit8.6 Document jams - sending 8.5.2 When the recording paper is not fed into the unit properly8.7 Cleaning the inside of the unit L Be careful when handling the drum and toner unitSee the caution for the drum unit on page 47 for details 8. Help 11 Reconnect the power cord and the telephone line cord 9.1 Reference lists and reports 9. General Information9.2 Technical data about this product Paper specifications Note for recording paperToner life Drum life10.1 Index 10. IndexRecording paper Recording paper size Redialling 26 Page Page Page 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PFQX1925ZA CM1003MN0
Top Page Image Contents