1. Introduction and Installation
1.5 Ink film
1.5.1 Installing the ink film
1Open the front cover by pulling up the center part.
2Release the back cover by pushing the green button (1).
1
3Open the back cover.
4Insert the front ink film roll by inserting its blue gear (1) into the left slot of the unit (2). Insert the rear ink film roll (3).
L The ink film is safe to touch, and will not rub off on your hands like carbon paper.
LMake sure the blue gear (1) and white gear (4) are installed as shown.
4
3
1
2
5Turn the blue gear (1) in the direction of the arrow until the ink film is tight (2).
1
2
10 | For Fax Advantage assistance, call |