7. Answering Machine
LThe display will show the remaining recording time.
6When finished recording, press {STOP}. L The unit will repeat your message.
7Press {MENU}.
To check the transfer greeting message
1.Press {MENU}, {#}{6}{1}.
2.Press {A} or {B} repeatedly to select “CHECK”.
3.Press {SET}.
LThe unit will play the message.
4.Press {MENU}.
To erase your transfer greeting message
1.Press {MENU}, {#}{6}{1}.
2.Press {A} or {B} repeatedly to select “ERASE”.
3.Press {SET}.
4.Press {MENU}.
Note:
LWhen transferring a call, the
Pager call
This feature allows your unit to call your pager when your unit receives an incoming voice message.
1.Press {MENU}.
2.Press {#}, then {7}{0}.
3.Press {A} or {B} repeatedly to select “ON”.
4.Press {SET}.
5.Enter your pager number up to 30 digits.
6.Press {SET}.
7.Enter your pager access code up to 10 digits if required.
8.Press {SET}.
MSG.=07734
LThe default code 07734 will show “Hello!” on your pager.
LIf you want to change this message, enter your message up to 30 digits.
9.Press {SET}.
LThe unit will dial the stored number.
10.Check that your pager received the pager test call.
11.Press {DIGITAL SP-PHONE}.
Note:
LIf you have subscribed to a Caller ID service, instead of the message you entered in step 8, your pager will display the caller’s telephone number.
49