Panasonic KX-FP145 Erasing a stored item from the broadcast memory, Press Broadcast

Page 35

4. Fax

4.4.3Erasing a stored item from the broadcast memory

1Press {>}.

2Press {A} or {B} repeatedly to display “<BROADCAST>”.

3Press {MENU}.

4Press {#}.

5Press {A} or {B} repeatedly to display the desired item you want to erase.

L To cancel erasing, press {STOP}.

6Press {SET}.

7Press {SET}.

LTo erase other items, repeat steps 5 to 7.

8Press {STOP}.

4.4.4Sending the same document to pre-programmed parties

1Insert the document FACE DOWN.

2If necessary, press {A} or {B} repeatedly to select the desired resolution (page 30).

3Press {BROADCAST}.

LThe document will be fed into the unit and scanned into memory. The unit will then transmit the data to each item, calling

each number sequentially.

LAfter transmission, the stored document will be erased automatically, and the unit will automatically print a broadcast sending report.

Note:

LIf you select “FINE”, “SUPER FINE” or

“PHOTO” resolution, the number of pages that the unit can transmit will decrease.

LIf the document exceeds the memory capacity, sending will be canceled.

LIf a party is busy or does not answer, it will be skipped and redialed later.

To send the same document to a one-time group of parties

You can also select a one-time group of parties to send the same document to. After transmission, this group will be deleted.

1.Insert the document.

2.Press {>}.

3.Press {A}or {B}repeatedly to display “<ONE TIME BROAD>”.

4.Press {SET} to start programming the items you want to transmit to.

5.Press {A} or {B} repeatedly to display the desired item.

6.Press {SET}.

LTo program other items, repeat steps 5 and 6 (up to 20 items).

7.Press {SET} to start transmission to the programmed items.

To cancel broadcast transmission

1.Press {STOP} while the unit displays “BROADCASTING”.

L The display will show “SEND CANCELED?”.

2.Press {SET}.

33

Image 35

Contents Operating Instructions Open How to use the operating instructionsKeys Listed in alphabetical order Location of ControlsTrademarks Thank you for purchasing a Panasonic fax machineFor your future reference Energy StarWet locations Important safety instructionsInstallation Never install telephone wiring during a Lightning stormFor best performance Directory Document feeder/scanner glass Direct commands for programmingWhen a function does not work, check 10.1 OpenLCR service for the Caller IQPart number*1 Quantity Specifications Included accessoriesTo place an order online for customers in the U.S.A. only Accessory informationReplacement film*1 KX-FA92 35 m OverviewDescription of buttons Ink film Installing the ink filmTurn Tight Replacing the ink filmConnect the handset cord Handset cordPaper tray Recording paperPush the tension plate back 120 V, 60 Hz Using surge protectorsConnections Press SET Selecting the way to use your fax machineStop Menu Your situation How to setupHow to receive calls Case 1 TAM/FAX Telephone Answering Machine/FaxSelect a Setup =DIST. Ring ± FAX/START Case 3 TEL onlyCase 4 FAX only How to receive faxesHelp function Adjusting volumeDate and time Your logo Stop Menu Your fax numberPreparation To delete a character/number Editing a stored itemErasing a stored item Helpful hintsTo search for a name by initial Example Lisa Making a phone call using the navigator directoryRecording a telephone conversation Press Digital SP-PHONEor lift the handsetCaller ID Erase Menu Stop Digital SP-PHONE FAX/START SET Caller ID serviceViewing and calling back using caller information How Caller ID is displayedTo edit a telephone number for calling back Erasing all caller informationErasing specific caller information Display while viewingStoring caller information into the navigator directory This feature is not available in the following casesFAX/START Digital SP-PHONE SET Sending a fax manuallyHelp Stop Redial Documents you can send Adding a new item into the broadcast memory Sending a fax using the navigator directoryBroadcast transmission Programming items into the broadcast memoryPress Broadcast To cancel broadcast transmissionErasing a stored item from the broadcast memory Sending the same document to pre-programmed partiesStop FAX/START Activating TEL modeReceiving a fax manually Auto Answer OFF SET Activating FAX only modeRing setting in TAM/FAX mode Receiving a fax Automatically Auto Answer onProgramming undesired callers Activating the junk fax prohibitorTo erase an item from the junk fax prohibitor list To display the junk fax prohibitor listTo print the junk fax prohibitor list Ring pattern Settings Distinctive Ring service from your phone companyUsing two or more phone numbers on a single telephone line Activating the Distinctive Ring featureProgramming the ring pattern assigned for fax Stop Start More copying featuresMaking a copy Collated pages Uncollated pages To collate multiple copiesExample Making 2 copies of a 4-page original document SET Stop Erase Record Auto Answer Recording your greeting messageLeaving a message for others or yourself Erasing your recorded greeting messageErasing recorded messages Listening to recorded messagesOperating from a remote location Remote operations using the remote command keyKey Remote command When voice memory is full Voice guideOther remote operations Leaving messages in a mailbox Allowing callers to leave private messagesRecording your mailbox greeting messages To use a mailboxTo erase all messages in a mailbox Listening to recorded mailbox messagesYour mailbox greeting message will be erased Press Menu To record a memo message into a mailboxTo listen to messages in another memory after playback How this feature worksTransferring recorded messages to another telephone Recording your transfer greeting messagePress Digital SP-PHONE To check the transfer greeting messageTo erase your transfer greeting message Pager callProgramming Programming basic featuresProgramming advanced features To cancel programmingBasic features Advanced features Code #46 Setting friendly reception Code #42 Setting the message alertCode #43 Setting the recording time alert Code #44 Setting the memory reception alertCode #76 Setting the connecting tone Code #52 Setting the mailbox 2 passwordCode #60 Setting the message transfer Code #67 Setting the incoming message monitorProgram code and direct command button Direct commands for programming features#51 Mailbox 1 password #13 Dialing mode#23 Overseas mode #25 Delayed transmission#60 Message transfer #76 Connecting tone#80 Reset advanced features #56 Greeting message for mailboxError messages Display Error messages ReportsRemaining ink film is low. Prepare a new ink film Recording paper was not fed into the unitTension plate is open. Close it Back cover is open. Close itGeneral When a function does not work, check hereInitial settings Fax receiving Fax sendingCopying Answering machine If a power failure occursWhen the recording paper has jammed in the unit Recording paper jamsOpen the back cover When the recording paper was not fed into the unit properly Document jams sending Recording paper feeder cleaningOpen the recording paper feeder cover Document feeder/scanner glass cleaningDo not use paper products, such as paper towels or tissues Thermal head cleaning Help Openlcr OpenLCR service for the Caller IQ featureTo turn the Caller IQ on / OFF Updating the rate table downloading the rate tablePrinting information Viewing informationDownloading information Reference lists and reports Technical data about this product Recording paper size Paper specificationsFCC and Other Information General Information Laser Facsimile Limited WarrantyFAX categories Parts Labor Thermal Transfer FacsimileFor In Limited Warranty product service Customer Services Directory Customer Services directory#77 Auto Answer IndexIndex Page Page PFQX2006ZA CM0204DT0 No Extra Cost