LFF6050
Paper delivery stop
Adjust the paper delivery stop, depending on the format of the document to be printed. Do not forget to raise the flap to prevent the sheets from falling down.
Starting your device
Device connection
Before plugging the power cord, it WARNING is imperative to refer to the
Security directives, page 1.
1Plug the end of the telephone line into the terminal socket and the other end into the wall telephone socket.
2Make sure that the On/Off switch is on Off (O position).
3Connect the power cord to the device. Plug the power cord to outlet on the wall.
2 - Installation
The power cord is used as a power unit cut off. As a precaution, the
WARNING outlet shall be located close to the device and be of easy access in case of danger.
4Press the On/Off button to turn on the device (I position).
Device initial setup
After a few seconds, when the machine has warmed up, the Easy Install function is launched and the LCD screen displays the following message:
1 - FRANCAIS
2 - ENGLISH
The Easy Install function will help you configure your machine by guiding you through the basic settings.
If you wish to modify the setting displayed, press the OK button. If you do not want to modify the displayed setting, press the C button: the Easy Install function then displays the next basic setting.
| If you do not want to carry out the | |||
| initial setup, press the | button. A | ||
Note | confirmation message appears. Press | |||
the | button again to confirm. | |||
|
To manually modify and customise the machine settings, refer to Parameters/Setup, page 31.
1 Select the desired language using the or buttons and confirm with OK.
2To set the country, press the OK button.
SET COUNTRY
YES=OK - NO=C
- 16 -