![](/images/new-backgrounds/1120737/120737121x1.webp)
LFF6050
5Select LASER PRO LL2 in the list and click on NEXT.
6A screen informs you that the drivers have been installed. Click on the CLOSE button.
You can now use the multifunction machine to print or scan your documents.
Connections
Make sure that your multifunction machine is powered off. The connection between the PC and the machine requires a USB 2.0 shielded cable no more than 3 meters long.
It is recommended to install the Companion Suite Pro software first and then to connect the USB cable to your machine (see Installing the full software package, page 52).
If you connect the USB cable before installing the Companion Suite Pro software the recognition system
Important (plug and play) identifies automatically that new hardware has been added. To start your machine drivers installation, refer to paragraph Installing the drivers manually, page 55 and follow the instructions on screen. When you use this procedure, only printing and scanning functions are activated.
1Locate your USB cable connectors and connect as shown below on the picture.
2Power on your multifunction machine.
The PC detects the device and the drivers are automatically installed.
3Once the installation is finished, a message indicates that the drivers are installed correctly.
You can now use the multifunction machine to print or scan your documents.
12 - PC Features
- 56 -