Sharp UX-B800 manual Transaction, List, Pseudo Ring, Duration, Flash, Select

Option Settings

TRANSACTION	This sets the condition for printing transaction reports (see page
LIST	56). Press a number key as follows:
		(ALWAYS PRINT): Print after every fax transmission,
		reception and error.
		(ERROR/MEMORY): Print only after an error or memory
		operation.
		(SEND ONLY): Print after every fax transmission.
		(ERROR ONLY): Print only when an error occurs.
		(NEVER PRINT): Never print.
	Initial setting: ERROR ONLY
PSEUDO RING	This sets the duration of the special ringing sound that alerts you
DURATION	to voice calls and manually dialled faxes in TEL/FAX reception
	mode. Press a number key as follows:
		15 seconds
		30 seconds
		60 seconds
		120 seconds
	Initial setting: 15 seconds
FLASH	This setting is used when the machine is connected to a PBX and
SELECT	the PBX uses the “Flash” method to connect to an outside line.
	Press	(SHORT TIME) if your PBX line is a normal line, or
		(LONG TIME) if your PBX is a high-speed line.
	Note: This setting is normally only used in Germany. In other
	countries, you can try changing the setting if you encounter
	difficulty with the default setting.

50