Panasonic KX-FC238HK manual Paper tray, Replacing the ink film

Page 18

2. Installation

2.1.2 Replacing the ink film

To ensure that the unit operates properly, we recommend the use of Panasonic replacement film. See page 9 for accessory information.

LWe cannot be responsible for any damage to the unit or degradation of print quality which may occur from the use of non-Panasonic replacement film.

1Open the covers (see steps 1 to 3 on page 14).

2Remove the used core (1) and used ink film (2).

1

2

3Remove the stoppers (1) and tags (2) from the new ink film (3).

2

1

2.2 Paper tray

Insert the tabs on the paper tray (1) into the slots on the back of the unit (2).

1

2

3

1

4Insert the ink film and close the covers (see steps 4 to 7 on page 14).

16

Image 18

Contents Operating Instructions How to use the operating instructions OpenHandset Location of ControlsBase unit Buttons Listed in alphabetical orderAttach your sales receipt here Important safety instructions Installation BatteryFor best performance Before calling back PhonebookUseful Information Included accessories QuantityAccessory information Available accessoriesModel No Specifications/Usage Button descriptions of the base unit Button descriptions of the handset Display descriptions of the handset Display iconsDisplay icon Meaning Overview Speaker Receiver Microphone Removing the shipping tapeInk film installation / replacement Installing the ink filmCorrect IncorrectPaper tray Replacing the ink filmRecording paper CorrectIncorrectReplacing the batteries Battery installation / replacementInstalling the batteries Electrolyte Do not mix old and new batteriesConnections Battery icons Battery strength Battery chargeBattery strength Battery lifePower OFF Turning the handset power ON/OFFPower on Base unit help functionINT Adjusting handset Adjusting base unit VolumeRinger volume Ring toneWith the handset Dialling modeDate and time With the base unitTo correct a mistake System Setup Press NaviExample 315 PM 12-hour time entry 1. Press 03 SET Date & Time Press SETKeypad Characters Your logoStop Menu Flash To enter your logo Example BillYour fax number Making phone calls To turn key lock OFF, press j/OK for about 2 seconds MuteKey lock Digital SP-PHONE MuteAnswering phone calls INT. Any key answer featureAuto talk feature Handset phonebookMaking a phone call using the phonebook CategoriesEditing a stored item Erasing stored items One touch dialChain dial Base unit phonebook Erasing a stored itemErase Digital SP-PHONE Caller ID service How Caller ID is displayedAnother method to erase a stored item Category features for handset phonebook Call Waiting Caller ID Handset onlyChanging category ring tones Viewing and calling back using caller information Caller IDFAX/START Digital SP-PHONE Editing a caller’s telephone number before calling back Erasing caller informationStoring caller information into the phonebook Into the handset phonebookInto the base unit phonebook Voice mail service Sending a fax manually Stop Redial FAX/START Digital SP-PHONEDocuments you can send Programming items into the broadcast memory Sending a fax using the base unit phonebookBroadcast transmission Adding a new item into the broadcast memorySending the same document to pre-programmed parties To cancel broadcast transmissionErasing a stored item from the broadcast memory To send the same document to a one-time group of partiesUse only as a fax FAX only mode Selecting the way to use your fax machineAuto receive Use mostly as a telephone TEL mode Manual receiveUse as a telephone and/or Fax Activating TEL mode Receiving a fax manually Auto answerStop FAX/START Digital SP-PHONE Activating TEL/FAX mode TEL/FAX ModeRing setting in TAM/FAX mode Activating TAM/FAX modeTAM/FAX Mode Receiving a fax automatically Auto answer onActivating FAX only mode FAX only ModeTo display the junk fax prohibitor list Activating the junk fax prohibitorStoring undesired callers To print the junk fax prohibitor listUsing with the ring detection feature To use the ring detection feature, set to TEL modeMore copying features Making a copyStop Start A4, Letter Setting Recording Original Paper size Document SizeDefault LegalSET MIC Stop Erase GREETING/REC GREETING/CHECK Recording your greeting messageErasing your recorded greeting message Press GREETING/RECErasing recorded messages Listening to recorded messagesLeaving a message for others or yourself SET Stop Erase PlaybackAnswering Machine Remote operation using remote commands Operating from a remote locationSummary of remote operation Skip greeting message Turn OFF auto answer settingTo turn on the auto answer setting Recording a marker messageProgramming basic features Programming advanced featuresBase unit programming Basic features Advanced features Code #44 Setting the memory reception alert Code #42 Setting the message alertCode #43 Setting the recording time alert Code #46 Setting friendly receptionCode #68 Setting the Error Correction Mode ECM Code #58 Setting the scan contrastCode #67 Setting the incoming message monitor Code #76 Setting the connecting toneDirect commands for programming features Program code and direct command button#25 Delayed transmission #13 Dialling modeOFF #23 Overseas mode OFF #73 Manual receive mode#80 Set default YES #76 Connecting tone#78 TEL/FAX ring setting OFF #77 Auto answerMaximum Menu Sub-menu Default settingHandset programming 2300/0600Programmable functions AlarmNight mode Ringer optionsDisplay setup Call options Other optionsProgrammable functions using the base unit PIN Setting pause lengthChanging the flash time Storing/changing emergency numbers Setting call restrictionResetting handset programming that uses the base unit PIN Changing the base unit PIN personal identification numberRepeater mode will be retained Operating additional units Registering a handset to a base unitHandset locator Cancelling a handsetCancelling a base unit Increasing the range of the base unitIntercom between handsets Example When handset 1 calls handset HandsetExample When handset 1 transfers a call to handset Handset Transferring calls between handsets / Conference callsCopying handset phonebook items Copying a stored itemCopying all stored items Available character entries for the handset Character entry modesExtended 2 character table O Cyrillic character table PError messages Reports Error messages Base unit display Display Cause and SolutionTransmission error occurred. Try again Service personnelPlease use genuine Panasonic replacement film Unnecessary messagesWhen a function does not work, check here Initial settingsGeneral Problem Cause & Solution Handset does not Problem Cause & Solution Base unit beepsReturns to standby mode Charging but the batteryFades. Interference from Problem Cause & Solution Static, sound cuts in/outDocuments using Other electrical unitsFax sending Fax receivingCopying If a power failure occurs Answering machineWhen the recording paper has jammed in the unit Recording paper jamsCorrect When the recording paper was not fed into the unit properly START1Document jams sending Document feeder / scanner glass cleaning Do not use paper products, such as paper towels or tissuesThermal head cleaning Help Reference lists and reports Base unit only Specifications Mass Weight Approx g Duplex procedureRF transmission power Approx mW Operating environment StandardIndex FAX only TAM/FAX 100 101 102 103 Global web site Copyright PFQX2217ZA CM0905PK02/2