Panasonic KX-FC238HK Dialling mode, Date and time, With the handset, With the base unit, SET Menu

Page 25

3. Preparation

3.7 Dialling mode

If you cannot dial (page 27, 39), change this setting depending on your telephone service.

LChange this setting both on the handset and on the base unit.

3.7.1 With the handset

{j/OK}

{>}{ih}

1Press {j/OK}.

2Select “Base Unit Setup”, then press

{>}.

3Enter “0000” (default base unit PIN).

LIf you changed the PIN, enter it (page 71).

4Select “Call Options”, then press {>}.

5Select “Dial Mode”, then press {>}.

6Select the desired setting, then press {>}.

–“Tone” (default): For tone dial service.

–“Pulse”: For rotary pulse dial service.

7Press {ih}.

3.7.2 With the base unit

{SET} {MENU}

{<}{>}{A}{B}

1Press {MENU}.

2Press {<} or {>} repeatedly to display “DIALLING MODE”.

3Press {A} or {B} repeatedly to display the desired setting.

– “TONE” (default): For tone dial service.

– “PULSE”: For rotary pulse dial service.

4Press {SET}.

LThe next feature will be displayed.

5Press {MENU}.

3.8 Date and time

You must set the date and time for both the handset and the base unit.

Times are set independently and may not necessarily be identical.

LThe other party’s fax machine will print the date and time on each page you send

according to your base unit’s date and time setting.

LThe accuracy of the clock is approximately

±60 seconds a month.

3.8.1 With the handset

{j/OK}

{<}{>}{ih}

Important:

LConfirm that the power cord of the base unit is connected.

LEnsure that w is not flashing.

LIf a power failure occurs, set the date and time for the handset again.

1Press {j/OK}.

2Select “Handset Setup”, then press {>}.

3Select “Time Settings”, then press {>}.

4Select “Set Date & Time”, then press

{>}.

L The cursor () will appear on the display.

5Enter the current date/month/year by selecting 2 digits for each.

Example: 10 August, 2005 Press {1}{0} {0}{8} {0}{5}.

Date :10-08-05

Time :00:00

@=12/24

23

Image 25

Contents Operating Instructions Open How to use the operating instructionsBase unit Location of ControlsHandset Buttons Listed in alphabetical orderAttach your sales receipt here Important safety instructions Battery InstallationFor best performance Phonebook Before calling backUseful Information Quantity Included accessoriesAvailable accessories Accessory informationModel No Specifications/Usage Button descriptions of the base unit Button descriptions of the handset Display icons Display descriptions of the handsetDisplay icon Meaning Speaker Receiver Microphone Removing the shipping tape OverviewInstalling the ink film Ink film installation / replacementIncorrect CorrectReplacing the ink film Paper trayCorrectIncorrect Recording paperInstalling the batteries Battery installation / replacementReplacing the batteries Electrolyte Do not mix old and new batteriesConnections Battery strength Battery chargeBattery icons Battery strength Battery lifePower on Turning the handset power ON/OFFPower OFF Base unit help functionRinger volume Adjusting handset Adjusting base unit VolumeINT Ring toneDate and time Dialling modeWith the handset With the base unitExample 315 PM 12-hour time entry 1. Press 03 System Setup Press NaviTo correct a mistake SET Date & Time Press SETStop Menu Flash Your logoKeypad Characters To enter your logo Example BillYour fax number Making phone calls Key lock MuteTo turn key lock OFF, press j/OK for about 2 seconds Digital SP-PHONE MuteAuto talk feature INT. Any key answer featureAnswering phone calls Handset phonebookCategories Making a phone call using the phonebookEditing a stored item One touch dial Erasing stored itemsChain dial Erasing a stored item Base unit phonebookErase Digital SP-PHONE How Caller ID is displayed Caller ID serviceAnother method to erase a stored item Call Waiting Caller ID Handset only Category features for handset phonebookChanging category ring tones Caller ID Viewing and calling back using caller informationFAX/START Digital SP-PHONE Erasing caller information Editing a caller’s telephone number before calling backInto the handset phonebook Storing caller information into the phonebookInto the base unit phonebook Voice mail service Stop Redial FAX/START Digital SP-PHONE Sending a fax manuallyDocuments you can send Broadcast transmission Sending a fax using the base unit phonebookProgramming items into the broadcast memory Adding a new item into the broadcast memoryErasing a stored item from the broadcast memory To cancel broadcast transmissionSending the same document to pre-programmed parties To send the same document to a one-time group of partiesSelecting the way to use your fax machine Use only as a fax FAX only modeAuto receive Manual receive Use mostly as a telephone TEL modeUse as a telephone and/or Fax Receiving a fax manually Auto answer Activating TEL modeStop FAX/START Digital SP-PHONE TEL/FAX Mode Activating TEL/FAX modeTAM/FAX Mode Activating TAM/FAX modeRing setting in TAM/FAX mode Receiving a fax automatically Auto answer onFAX only Mode Activating FAX only modeStoring undesired callers Activating the junk fax prohibitorTo display the junk fax prohibitor list To print the junk fax prohibitor listTo use the ring detection feature, set to TEL mode Using with the ring detection featureMaking a copy More copying featuresStop Start Default Setting Recording Original Paper size Document SizeA4, Letter LegalErasing your recorded greeting message Recording your greeting messageSET MIC Stop Erase GREETING/REC GREETING/CHECK Press GREETING/RECLeaving a message for others or yourself Listening to recorded messagesErasing recorded messages SET Stop Erase PlaybackAnswering Machine Operating from a remote location Remote operation using remote commandsSummary of remote operation To turn on the auto answer setting Turn OFF auto answer settingSkip greeting message Recording a marker messageProgramming advanced features Programming basic featuresBase unit programming Basic features Advanced features Code #43 Setting the recording time alert Code #42 Setting the message alertCode #44 Setting the memory reception alert Code #46 Setting friendly receptionCode #67 Setting the incoming message monitor Code #58 Setting the scan contrastCode #68 Setting the Error Correction Mode ECM Code #76 Setting the connecting toneProgram code and direct command button Direct commands for programming featuresOFF #23 Overseas mode #13 Dialling mode#25 Delayed transmission OFF #73 Manual receive mode#78 TEL/FAX ring setting #76 Connecting tone#80 Set default YES OFF #77 Auto answerHandset programming Menu Sub-menu Default settingMaximum 2300/0600Night mode AlarmProgrammable functions Ringer optionsDisplay setup Other options Call optionsSetting pause length Programmable functions using the base unit PINChanging the flash time Resetting handset programming that uses the base unit PIN Setting call restrictionStoring/changing emergency numbers Changing the base unit PIN personal identification numberRepeater mode will be retained Registering a handset to a base unit Operating additional unitsCancelling a base unit Cancelling a handsetHandset locator Increasing the range of the base unitExample When handset 1 transfers a call to handset Handset Example When handset 1 calls handset HandsetIntercom between handsets Transferring calls between handsets / Conference callsCopying a stored item Copying handset phonebook itemsCopying all stored items Character entry modes Available character entries for the handsetCyrillic character table P Extended 2 character table OError messages Reports Display Cause and Solution Error messages Base unit displayPlease use genuine Panasonic replacement film Service personnelTransmission error occurred. Try again Unnecessary messagesInitial settings When a function does not work, check hereGeneral Returns to standby mode Problem Cause & Solution Base unit beepsProblem Cause & Solution Handset does not Charging but the batteryDocuments using Problem Cause & Solution Static, sound cuts in/outFades. Interference from Other electrical unitsFax receiving Fax sendingCopying Answering machine If a power failure occursRecording paper jams When the recording paper has jammed in the unitCorrect START1 When the recording paper was not fed into the unit properlyDocument jams sending Do not use paper products, such as paper towels or tissues Document feeder / scanner glass cleaningThermal head cleaning Help Reference lists and reports Base unit only Specifications RF transmission power Approx mW Operating environment Duplex procedureMass Weight Approx g StandardIndex FAX only TAM/FAX 100 101 102 103 Global web site Copyright PFQX2217ZA CM0905PK02/2