PART 5 FACTORY PRESET VALUES
Table 5.1 Factory preset value
MENU ITEMS | FACTORY PRESET VALUES | NOTES |
Set Point 1 (SP1) | 000.0 |
|
Set Point 2 (SP2) | 000.0 |
|
Input: |
|
|
Input Type (INPT) | TC, type K |
|
Reading Configuration (RDG): |
|
|
Decimal Point (DEC.P) | FFF.F |
|
Temperature unit (TEMP) | °F |
|
Filter value (FLTR) | 0004 |
|
Alarm 1 & 2: |
|
|
Alarm 1 (ALR1) | Disable (DSBL) |
|
Alarm 2 (ALR2) | Enable (ENBL) |
|
Absolute/Deviation (ABSO/DEV) | Absolute (ABSO) |
|
Latch/Unlatch (LTCH/UNLT) | Unlatch (UNLT) |
|
Contact Closure (CT.CL) | Normally Open (N.O.) |
|
Active (ACTV) | Above (ABOV) |
|
Alarm At Power On (A.P.ON) | Disable (DSBL) | Alarm 1 only |
Alarm Low (ALR.L) |
| |
Alarm High (ALR.H) | 400.0 |
|
LOOP: |
|
|
Loop Break Time (LOOP) | Disable (DSBL) |
|
Loop Value (B.TIM) | 00:59 |
|
Reading Adjust Value (R.ADJ) | 000.0 |
|
Setpoint Deviation (SP.dV) | Disable (DSBL) |
|
OUTPUT 1: |
|
|
Self (SELF) | Disabled (DSBL) |
|
% Low Value (%LO) | 0000 |
|
% High Value (%HI) | 0099 |
|
Control Type (CTRL) | On/Off |
|
Action Type (ACTN) | Reverse (RVRS) |
|
Dead Band (DEAD) | 020.0 |
|
PID Auto (AUTO) | Disable (DSBL) |
|
Anti Integral (ANTI) | Disable (DSBL) |
|
Proportion Value (PROP) | 020.0 |
|
Reset Value (REST) | 0180 |
|
Rate Value (RATE) | 0000 |
|
Cycle Value (CYCL) | 0007 |
|
Damping Factor (DPNG) | 0003 |
|
ANALOG OUTPUT (Retransmission) |
|
|
Analog Output (ANLG) | Enabled (ENBL) |
|
Current/Voltage (CURR/VOLT) | Voltage (VOLT) |
|
Scale and Offset | Reading: 0 - 999.9 cts, Output: 0 - 10 V | |
|
|
|
58