Ricoh AP505 manual Troubleshooting, Error & Status Messages on the Operation Panel

Page 47

4. Troubleshooting

Error & Status Messages on the Operation Panel

Message

Description

Comments

 

 

 

ADD FUSER OIL

The fuser oil bottle is empty.

Replace the fuser oil bottle.

 

 

⇒ P.50 “Replacing the Fuser

 

 

Oil Bottle and Ozone Filter”

 

 

 

CALL SERVICE

There is a malfunction in the

Turn the printer off and on.

SC:nn

printer.

If this doesn't clear the prob-

 

 

 

lem, contact your sales or

 

 

service representative.

 

 

 

CHECK CHARGER

The charger is not set cor-

Set the charger correctly.

 

rectly or the charger cleaner

⇒ P.53 “Replacing the Waste

 

is not in the correct position.

Toner Bottle and Charger”

 

 

 

CHECK FUSING

The fusing unit is not in-

Contact your sales or service

UNIT

stalled in the printer.

representative.

 

 

 

 

 

CHECK PCU

The photoconductor unit is

Install the photoconductor

 

not installed in the printer.

unit. ⇒ P.48 “Replacing the

 

 

Photoconductor Unit”

 

 

 

CHECK TONER

The toner cartridge is not in-

Install the cartridge correct-

CARTRIDGE

stalled correctly.

ly. ⇒ P.45 “Replacing the

 

Toner Cartridge”

 

 

 

 

 

CHECK WASTE

The waste toner bottle is not

Install the waste toner bot-

TONER BOTTLE

installed.

tle. ⇒ P.53 “Replacing the

 

Waste Toner Bottle and Charg-

 

 

 

 

er”

 

 

 

CHECK (tray name)

The paper tray is not in-

Install the paper tray cor-

 

stalled correctly.

rectly.

 

 

 

 

The tray on the paper feed-

Install the paper tray cor-

 

ing path was not set correct-

rectly. The printer will re-

 

ly when the printer received

start printing automatically.

 

the print job.

 

 

 

 

CLOSE

The front cover is open.

Close the front cover.

FRONT COVER

 

(⇒ P.1)

 

 

 

 

 

CLOSE

The left cover is open.

Close the left cover. (⇒ P.1)

LEFT COVER

 

 

 

 

 

CLOSE PAPER EXIT

The paper exit cover is open.

Close the paper exit cover.

COVER

 

(⇒ P.3)

 

 

 

 

 

29

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Printer Reference Overseas Affiliates Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Trademarks Safety During Operation Safety InformationIii Page Energy Star Program Low-power mode Energy Save modeSpecifications Manuals for Your Printer Manuals for Your PrinterSymbols How to Read this ManualTable of Contents Consumables Cleaning the PrinterMoving and Transporting the Printer Specifications Replacing ConsumablesPage Exterior-Front View Guide to the PrinterPaper Tray Bypass trayExterior-Rear View Interior Operation Panel Ready Turning the Printer On and OffTurning On the Printer Turning Off the PrinterInstalling Options Memory Unit Type505 ⇒ P.9 Available OptionsInstalling the Memory Unit Type505 Dimm For more information on Check the contents of the box for the following items Installing the Printer Hard Disk Type505Press Enter Press Enter to Initialize DiskInitializing Move the printer to make install- ing space Installing the Paper Feed Unit Type305Place the printer on the paper feed unit Remove both pieces of adhesive tapePull out the paper tray, and re- move the padding Remove the ring attached to the red tagPaper Types and Sizes Paper and Other Media Supported by this PrinterB6 JIS Paper Sizes Metric version⇒ P.27 Loading Paper in the Bypass Tray Paper Sizes Inch version ⇒ P.27 Loading Paper in the Bypass Tray Paper types and cautions Plain paper Precautions for PaperAdhesive labels Thick PaperOHP transparencies Paper not supported by this printer Printable Area Load paper into the tray with the print side up Loading PaperLoading Paper in the Paper Tray TRAY1 * Size Printer SetupSpecifying paper size using the operation panel SET * SizeLoad paper until it stops with the print side down Loading Paper in the Bypass TrayOpen the bypass tray Slide the side guidesPress Enter until Bypass Tray Size appears Sliding out the Output Tray ExtenderBypass Tray Size Error & Status Messages on the Operation Panel Troubleshooting⇒ P.38 Removing Misfed Pa Tle. ⇒ P.53 Replacing Waste Toner Bottle and Charg Printer Doesnt Print Possible Cause SolutionsNetwork Connection If the printer is using the I/O timeout settingTerface cable Windows NT4.0 Windows 95/98Status Possible Causes, Descriptions, and Solutions Other Printing ProblemsTions for Paper Ing the Charger Removing Misfed Paper Bypass tray When the Message OpenAppears Misfeed AppearsOpen the paper exit cover When the Message RemoveTray Appears Close the paper exit cover Close the front cover Remove the misfed paper from inside of the printerRemove the misfed paper from Cleaning the Charger Cleaning the PrinterCleaning the Friction Pad Remove the cleaning brush from back of the front cover Cleaning the Dust-proofing glassTFWX280E Slide the lock lever up Replacing ConsumablesOpen the left cover About 10 times, as shown in the il- lustration Remove the protective sheet from the new toner cartridgeHold the new toner cartridge Shake it with a horizontal motionReplace Toner Magenta MaintenanceMagenta Toner Magenta Toner Please WaitReplace PCU Turn off the printers power switchReplacing the Photoconductor Unit TFWX400E Fuser OIL LOW ADD Fuser OIL Turn on the printer’s power switchReplacing the Fuser Oil Bottle and Ozone Filter Close the fuser oil bottle cover Remove the green cap from the new oil bottleInsert a new ozone filter into the printer Replacing the Waste Toner Bottle and Charger Waste Toner Almost FullLocks release, and the charg- er is lifted slightly Moving and Transporting the Printer AppendixMainframe SpecificationsWarm-up Time Noise Emission Sound Power LevelDimensions WeightOptional Equipment Options Toner Cartridge ConsumablesOther Consumables Service Life *1Index
Top Page Image Contents