Ricoh AP505 Installing the Paper Feed Unit Type305, Move the printer to make install- ing space

Page 31

Installing the Paper Feed Unit Type305

Installing the Paper Feed Unit Type305

RCAUTION:

•It is recommended that at least two persons are used to lift the machine. Otherwise, the ma- chine might fall and cause per- sonal injury.

•When lifting the machine, use the inset grips on both sides of the machine. Otherwise, the ma- chine might fall and cause per- sonal injury.

•When moving the printer, be sure to keep it level to avoid spill- ing the fuser oil. If oil is spilt, wipe it with alkaline cleaner. Other- wise, the oily surfaces can cre- ate the danger of slipping and personal injury.

Important

❒If your printer is equipped with the optional tray, do not pull out more than one tray with paper at a time. If you do, the printer might tilt forward.

Note

❒It is impossible to install more than two paper feed units to your print- er at a time.

ACheck the contents of the box for the following items.

•Paper Feed Unit Type305

•Installation Guide

CMove the printer to make install- ing space.

2

TFWH100E

Important

❒Be careful to lift the printer as the right front side of the printer is significantly heavier than the left front side.

DRemove the paper feed unit from the box, and remove the styro- foam packing and the bag from the side covers.

TFWP050E

BTurn off the printer's power switch and remove all cables and cords from the printer.

13

Image 31

Contents Printer Reference Overseas Affiliates Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Page Means Power ON. b means Power OFF Trademarks Safety During Operation Safety InformationIii Page Specifications Low-power mode Energy Save modeEnergy Star Program Manuals for Your Printer Manuals for Your PrinterSymbols How to Read this ManualTable of Contents Consumables Cleaning the PrinterMoving and Transporting the Printer Specifications Replacing ConsumablesPage Exterior-Front View Guide to the PrinterPaper Tray Bypass trayExterior-Rear View Interior Operation Panel Ready Turning the Printer On and OffTurning On the Printer Turning Off the PrinterInstalling Options Memory Unit Type505 ⇒ P.9 Available OptionsInstalling the Memory Unit Type505 Dimm For more information on Check the contents of the box for the following items Installing the Printer Hard Disk Type505Initializing Press Enter to Initialize DiskPress Enter Move the printer to make install- ing space Installing the Paper Feed Unit Type305Place the printer on the paper feed unit Remove both pieces of adhesive tapePull out the paper tray, and re- move the padding Remove the ring attached to the red tagPaper Types and Sizes Paper and Other Media Supported by this PrinterB6 JIS Paper Sizes Metric version⇒ P.27 Loading Paper in the Bypass Tray Paper Sizes Inch version ⇒ P.27 Loading Paper in the Bypass Tray Paper types and cautions Plain paper Precautions for PaperAdhesive labels Thick PaperOHP transparencies Paper not supported by this printer Printable Area Loading Paper in the Paper Tray Loading PaperLoad paper into the tray with the print side up TRAY1 * Size Printer SetupSpecifying paper size using the operation panel SET * SizeLoad paper until it stops with the print side down Loading Paper in the Bypass TrayOpen the bypass tray Slide the side guidesBypass Tray Size Sliding out the Output Tray ExtenderPress Enter until Bypass Tray Size appears Error & Status Messages on the Operation Panel Troubleshooting⇒ P.38 Removing Misfed Pa Tle. ⇒ P.53 Replacing Waste Toner Bottle and Charg Printer Doesnt Print Possible Cause SolutionsTerface cable If the printer is using the I/O timeout settingNetwork Connection Windows NT4.0 Windows 95/98Status Possible Causes, Descriptions, and Solutions Other Printing ProblemsTions for Paper Ing the Charger Removing Misfed Paper Bypass tray When the Message OpenAppears Misfeed AppearsTray Appears When the Message RemoveOpen the paper exit cover Remove the misfed paper from Remove the misfed paper from inside of the printerClose the paper exit cover Close the front cover Cleaning the Friction Pad Cleaning the PrinterCleaning the Charger Remove the cleaning brush from back of the front cover Cleaning the Dust-proofing glassTFWX280E Open the left cover Replacing ConsumablesSlide the lock lever up About 10 times, as shown in the il- lustration Remove the protective sheet from the new toner cartridgeHold the new toner cartridge Shake it with a horizontal motionReplace Toner Magenta MaintenanceMagenta Toner Magenta Toner Please WaitReplacing the Photoconductor Unit Turn off the printers power switchReplace PCU TFWX400E Replacing the Fuser Oil Bottle and Ozone Filter Turn on the printer’s power switchFuser OIL LOW ADD Fuser OIL Close the fuser oil bottle cover Remove the green cap from the new oil bottleInsert a new ozone filter into the printer Replacing the Waste Toner Bottle and Charger Waste Toner Almost FullLocks release, and the charg- er is lifted slightly Moving and Transporting the Printer AppendixMainframe SpecificationsWarm-up Time Noise Emission Sound Power LevelDimensions WeightOptional Equipment Options Toner Cartridge ConsumablesOther Consumables Service Life *1Index