2.5.3 Zoom
(1)Select the zoom/focus mode by pressing the [SET] but-
ton twice.
The zoom/focus icon 
is displayed on the screen of the selected channel.
(2)Press the direction button (up or down) to control the camera’s zoom.
(3)Press the [SET] button twice. The zoom/focus mode is cancelled.
2.5.4 Focus
(1)Select the zoom/focus mode by pressing the [SET] but-
ton twice.
The zoom/focus icon 
is displayed on the screen of the selected channel.
(2)Adjust the focus by pressing direction buttons (right/left).
(3)Press the [SET] button twice. The zoom/focus mode is canceled.
2.5.5 Iris
(1)Select the iris control mode by pressing the [SET] but-
ton 3 times.
The iris control icon 
is displayed on the screen of the selected channel.
(2)Adjust the iris by pressing direction buttons (right/left).
(3)Cancel the iris control mode by pressing the [SET] but- ton once.
2.5.6 To register preset position of cameras
(1)Press the [SET] button 1 - 3 times to select the required camera control mode.
An icon is displayed on the screen of that channel, according to the selected camera control mode.
(2)Press the [REC] button to display the Register Preset Position window.
PRESET REGIST
Preset Number |
| 001 |
| ||
|
|
|
|
|
|
| OK |
| Cancel |
| |
Enter the desired preset position number, and then press the [SET] button or click the [OK] button after pressing the [SET] button.
Notes:
1.Refer to descriptions about "PRESET INFORMA- TION"
2.Up to 256 preset positions can be registered.
3.When setting preset positions for Panasonic cam- eras, the indication "MEMORY" will be displayed at the center of the screen by pressing the [SET] but- ton. If the indication is not displayed, the camera is not recognized.
2.5.7 To move a camera to the home position
(1)Press the [SET] button once to select the required cam- era control mode.
An icon is displayed on the screen of that channel, according to the selected camera control mode.
(2)The camera returns to the home position by pressing the [STOP] button.
Notes:
1.For the settings of the camera home position, refer to the operating instructions for the camera.
2.If the camera is not a Panasonic, the present posi- tion is saved as an origin, in principle, if the [STILL] button is pressed in the camera control mode. For some cameras, however, this setup may fail. Refer to the operating instructions for the camera for details.
2.5.8 To display the camera setting menu
Prior to controlling the camera that has been connected to this unit, perform the settings for this camera, without fail, according to the "CAMERA SETUP" menu for this unit.
The contents, operating method, and other items of the "CAMERA SETUP" menu can differ according to the camera being used. Refer to the operating instructions for the cam- era for details.
(1)Select the desired camera by using the camera selec- tion button (1 - 8) or the direction button (up/down) dur- ing the live monitoring screen.
The image frame of the selected channel (camera) blinks.
(2)Select the pan/tilt control mode by pressing the [SET]
button once.
The camera pan/tilt control icon 
is displayed on the screen of the selected channel.
(3)Press the [MENU] button.
The setup menu of the corresponding camera is dis- played on the screen of the selected channel. In addi- tion, the camera menu icon 
is displayed on the right of the pan/tilt control icon.
The camera setup buttons are specified as follows: Cursor movement: up or down of the direction button Preset value amendment: right or left of the direction button
[SET] button to open the next menu after defining the preset value. [SET] button
Return to the previous menu. [ESC] button
30