Panasonic WJ-RT208 manual User information User Information, Event log Event LOG, 2005-01-14

"[R] System Updated"

"Disk Full"

"User Allow Overwrite"

"Full Records"

"Disk Access Error"

"Thermal Error"

"Fan Error"

Event log (EVENT LOG)

(1)Select "REPORT" from "WJ-RT208 SETUP MENU". Move the cursor to "EVENT LOG" of the "REPORT" menu and press the [SET] button.

EVENT LOG

No. Time & Date Event p 01/22

12005-01-24 10:43:22 Ch=3 VMD alarm

22005-01-24 09:43:22 Cam=5 loss signal

32005-01-24 08:43:22 Port=2 terminal alarm

42005-01-24 07:43:22 Cam=4 get signal

52005-01-24 06:43:22 Port=1 terminal alarm

62005-01-24 05:43:22 Cam=5 loss signal

72005-01-24 04:43:22 Port=2 terminal alarm

82005-01-24 03:43:22 Port=2 terminal alarm

92005-01-24 02:43:22 Cam=5 loss signal

10 2005-01-24 01:43:22 Ch=3 VMD alarm

Prev Next Return

(2)Contents of event log descriptions are as follows: "Cam=n loss signal"

"Cam=n get signal" "Port=n terminal alarm" "Ch=n VMD alarm"

Note:

"SYSTEM LOG" and "EVENT LOG" are stored in the hard disk with the smallest number. If this disk is replaced, logs cannot be checked any more. If this hard disk is initialized, the logs are also deleted.

Oldest data information (OLDEST DATA INFOR-

MATION)

(1)Select "REPORT" from "WJ-RT208 SETUP MENU". Move the cursor to "OLDEST DATA INFORMATION" of the "REPORT" menu and press the [SET] button.

OLDEST DATA INFORMATION

2005-01-14 13:14:10

OK

Note: In the "OLDEST DATA INFORMATION" menu, the time of the oldest data available on the present hard disk is displayed.

3.1.8 User information (USER INFORMATION)

User level setup (USER LEVEL SETUP)

(1)Press the [MENU] button. "WJ-RT208 SETUP MENU" appears.

WJ-RT208 SETUP MENU

SYSTEM MANAGEMENT

SEARCH

REC&EVENT SETUP

PTZ SETUP

CAMERA SETUP

COMMUNICATION SETUP

REPORT

USER INFORMATION

DATA MANAGEMENT

(2)Move the cursor to "USER INFORMATION" and press the [SET] button.

USER INFORMATION

USER LEVEL SETUP

ONLINE USER INFORMATION

PASSWORD

KEYLOCK

(3)Move the cursor to "USER LEVEL SETUP" and press the [SET] button.

		USER LEVEL SETUP
Channel No.			1
Type			Live View Playback
Operator				Yes	Yes
Viewer				Yes	Yes
	All			OK	Cancel

Press the direction buttons (right/left) to changeover to the required camera number or update the user level of the operator and viewer.

If the user level of the operator or viewer is set at "No" for a channel, that operator or viewer cannot watch that channel image. However, audio will not be ruled by these settings.

Cautions:

1.User level higher than your own level cannot be modified.

2.In regard to [All] operation and functions, refer to the timer recording explanation.

43