Video motion detector recording VMD REC

Panasonic WJ-RT208 manual Video motion detector recording VMD REC

	TERMINAL REC
Terminal Input	1
Alarm Output	0
Alarm Time	030	Sec
Rec. Interval	060	Sec
PTZ Preset	000
Rec. Channel	1
Rec. Quality	Normal	Full	CBR
Period1	00: 00	24: 00	Off
Period2	00: 00	24: 00	On
All	OK	Cancel

Terminal input connector: 1 - 8

Default: 1

Alarm output connector: 0 - 3

Default: 0 (0 indicates that there is no alarm signal output.)

Alarm time: 000 - 999 Default: 030

Rec. Interval: 030 - 999

Default: 060

Camera preset position: 000 - 256

Default: 000

Recording channel: 0 - 8

Default: 1

Picture quality: "SP Fine/Fine/Good/Normal/Extended" Default: "Normal"

Frame rate: "Full, 1/2F, 1/4F, 1/8F, 1/16F" Default: "Full"

Stream type: "CBR/VBR"

Default: "CBR" (If screen changes seem extreme, the setting made at "VBR" is preferable.)

Period: "Period1/Period2" Default: 00: 00 - 24:00

When "On" is selected for "Period1" and/or "Period2", alarm detection will be validated in the set period.

Notes:

1.When setting is completed, set "Period1" and/or "Period2" at "On".

2.For [All] operation and functions, refer to the timer recording explanation.

(4)When setting is completed, move the cursor to [OK] and press the [SET] button.

Note: When trying to stop the recording by changing the settings in the process of the terminal recording, recording will not stop immediately. The terminal recording will not stop unless time set for "Rec. Interval" has been passed. To stop the terminal recording, stop recording manually after changing the settings for the terminal recording.