2. Operation
2.1 Screen Operation
2.1.1 Spot display
If you want to display only one screen of a specified chan- nel, press the channel number.
Images from the selected camera channel will be displayed with a spot display.
Note: In the case of a
If you want to have a display on the spot screen, changeover to the multi screen display and select the
2.1.2 Multiscreen display
Each time the
2.1.3 Sequence display
The sequential display will start by pressing the [SEQUENCE] button.
The icon 
is displayed in the lower part of the screen. Press the [SEQUENCE] button again. The sequential dis- play stops.
2.1.4 Mute
(1)Press the [ESC] button to activate the mute function.
The mute icon 
is displayed in the upper part of the screen.
(2)Press the [ESC] button again. The mute function is cancelled.
Caution: If the mute function is in operation, all chan- nels are muted. It is impossible to mute specific channel(s) with this setting.
This is the same when the mute function is in opera- tion during playback.
2.1.5 Still display
The presently displayed screen becomes still.
(1)Select the desired channel to be still by using the cam- era selection button (1 - 8) or the direction button (up/down).
The image frame of the selected channel blinks.
(2)Press the [STILL] button.
The selected channel screen becomes still and the still
icon 
is displayed in a lower part of the screen. Caution: It is impossible to make the screen stand still
during playback.
26
2.2 Manual Recording
(1)Select the desired channel to be recorded by using the camera selection button (1 - 8) or the direction button (up/down).
(2)Press the [REC] button.
The indicator of the corresponding camera button is lit and recording is started.
The recording icon 
is displayed on the selected channel.
(3)Select the desired channel to be stopped by using the camera selection button (1 - 8) or the direction button (up/down) to stop the recording.
Hold down the [STOP] button for 2 seconds.
The indicator of the corresponding camera button is unlit and recording is stopped. At the same time, the record icon also disappears.
Note: When the [REC] button is pressed while in the cam- era control mode, recording will not be performed.
To perform recording, press the [REC] button after releasing the camera control mode.
2.3 Playback of Recorded Image
2.3.1 Basic operation
(1)Select the desired channel to be played back by using the camera selection button (1 - 8) or the direction but- ton (up/down).
(2)Press the [PLAY] button.
Playback images are displayed on a single screen.
The playback icon 
is displayed during playback.
Notes:
1.The playback screen is displayed only for channel 1. Live image monitoring for a channel other than channel 1 or screen splitting can even be carried out during playback.
2.If the recording time is extremely short or the back- ground is very dark, data may fail to be recorded or played. In such a case, the recording file is lowered to 16 KB or below.
3.It is impossible to play the same recorded image simul- taneously by two users or more.
4.When playing recorded images for many hours, images may not be played smoothly or may be paused some- times. In this case, stop playback once, and then resume playback.
5.When displaying images on a
6.When there are 5 000 records or more for the channel to be played, the latest 5 000 records will be subject to be played.
To play recorded images other than the latest 5 000 records, search for the desired record and play it (3.2 Search and Playback).
Playback will stop when the date changes (0:00).
(3)Select the channel 1 by using the camera selection but- ton 1 or the direction button (up/down) to stop the play- back, and press the [STOP] button.