↓: Down button
•Menu:
The cursor moves downwards on the menu or dia- log.
•Camera control:
Controls the downward movement of the camera. Images will be zoomed out.
←: Left button
•Menu:
Moves the cursor to the left or changes option parameters.
•Camera control:
Controls the movement of the camera to the left. Shifts the focus nearer.
Closes the iris.
→: Right button
•Menu:
Moves the cursor to the right or changes option parameters.
•Camera control:
Controls the movement of the camera to the right. Shifts the focus farther.
Opens the iris.
!6Cancel Button (ESC)
To return to the previous menu, press this button.
When the menu is not displayed, pressing this button once activates the mute function. To release the mute function, press this button again.
!7Set Button (SET)
In a dialog box, this button is used to OK a selected parameter.
When controlling the camera, this button is used to change the control mode (pan/tilt → zoom/focus → iris). When setting the motion detection area, it is used to change the points describing the detection area.
!8Stop Button (STOP)
Pressing this button for two seconds stops recording. In playback mode, pressing this button stops playback.
!9Play Button (PLAY)
Pressing this button plays back the images recorded on the current channel.
When this button is pressed in pause mode, the next frame will be displayed.
When this button is pressed while panning/tilting opera- tion, the auto function of the camera will be activated.
@0Recording Button (REC)
Pressing this button starts recording the data on the current channel. If the camera control is ON, the current position of the camera is saved as preset position.
@1Pause Button (PAUSE)
Pauses playback.
@2Fast Reverse Play Button (REV)
Starts fast reverse playback. Three playback speeds are available.
@3Fast Forward Play Button (FWD)
Starts fast forward playback. Three playback speeds are available.
@4@5Skip Playback Button (SKIP)
Skips to the previous or next recorded data, and plays the data from its beginning.
@6Copy Connector (COPY 2)
This connector is for connecting an external hard disk to back up the data recorded on the hard disks.
9