Ingersoll-Rand ETA5, ETA2 manual If you have chosen I/S

7529_eng.fm Page 11 Wednesday, November 12, 2003 8:57 AM

If you have chosen I/S

Select units of measure - inlb, ftlb etc. using	press	Enter
Type in transducer span-	press	Enter
Type in mV/V	press	Enter
Type in Bridge resistance	press	Enter
Type in Pulses Per Rev (only for angle type)	press	Enter
Type in Serial Number	press	Enter

To set-up another transducer	press MENU	1
Select another memory (B to I) using the	keys and press	Enter
To return to the main menu, press MENU
If you have chosen SER
Select location of decimal point using	press Enter
Select Baud Rate, Data Bits, Stop Bits and Parity in the same manner
To set-up another transducer press MENU	1
Select another memory (B to I) using the	keys and press	Enter
To return to main menu press MENU

11