Ingersoll-Rand manual Operators Manual for Model ETA2 and ETA5 Analyzers

Page 2

7529_eng.fm Page 1 Wednesday, November 12, 2003 8:57 AM

04578092

Form P7529 Edition 1 January, 2002

OPERATORS MANUAL FOR

MODEL ETA2 AND ETA5 ANALYZERS

This ETA Analyzer is used for calibration or data collection of torque tools, power and hand operated, using external transducer(s). This Analyzer can also be used for joint development and as a failure analysis instrument (using external transducers).

Ingersoll-Rand is not responsible for customer modification of units for applications on which Ingersoll-Rand was not consulted.

This symbol is to alert the user and service personnel to the presence of important operat- ing instructions that must be read and understood to prevent personal injury, electrical shock or damage to the equipment.

IMPORTANT SAFETY INFORMATION ENCLOSED -

SAVE THESE INSTRUCTIONS.

READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS PRODUCT.

IT IS YOUR RESPONSIBILITY TO MAKE THIS SAFETY INFORMATION

AVAILABLE TO OTHERS THAT WILL OPERATE THIS PRODUCT.

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN

ELECTRIC SHOCK, FIRE AND/OR SERIOUS PERSONAL INJURY.

Refer All Communications to the Nearest Ingersoll-Rand

Office or Distributor.

© Ingersoll-Rand Company 2002

Printed in U.S.A.

Image 2

Contents Operators Manual Operators Manual for Model ETA2 and ETA5 Analyzers Placing Analyzer in Service 7529eng.fm Page 3 Wednesday, November 12, 2003 857 AM Save These INSTRUCTIONS. do not Destroy Table of Contents 7529eng.fm Page 6 Wednesday, November 12, 2003 857 AM How to use this Manual Following method is adopted throughout this manualPacking List Battery Charging Care and StorageFor ETA5 Edit Transducer FileFor ETA2 If you have chosen I/S If you have selected H/O Barcode read input for characteristic Names and comments If you have selected KEYMeasure Mode Up to 200 readings stored Type in amount of Dip press To select this option From main menu Measure Mode Circle-Store OptionPrinting of stored readings from measure mode Press Direct Direct Measure Setup 7529eng.fm Page 18 Wednesday, November 12, 2003 857 AM To set up a Characteristic ETA5 only Select Frequency Response using Then press Enter Direct Characteristic Mode ETA5 only Through the available characteristics and press7529eng.fm Page 22 Wednesday, November 12, 2003 857 AM To Store Data single characteristic ETA5 only 7529eng.fm Page 24 Wednesday, November 12, 2003 857 AM To set up a Round ETA5 only Screen will show Characteristic No 2 of ?To Store Data by Round ETA5 only To set up a Master Round ETA5 only Set-upTo return to the main menu, press Menu Menu Next job, it will switch back when you pressTo Store Data by Master Round If you haveTo Display Recorded Data on ETA2 To Display Recorded Data on ETA5To View Cp and Cpk To Erase Stored Data To Erase Readings Stored in Measure ModeFrench Cp and Cpk To set this functionTo Erase Characteristic Data To Erase Stored Data and Setups on ETA5To Erase Characteristic Setup To Erase Round Setup Information To Erase Round DataTo print details of Setup or Analysis of Data from ETA5 PrintingTo print details of readings by round To print details of setup and analysis of readings by round To print details of all characteristic setupsTo print details of a particular round setup To print readings taken by characteristicThen press Print Measure Printing Data to PC To Set Date and TimeTo Set Power Off and Backlight Time Delays To Configure Printer PortDisplay window Pressing Will remove the protection To Set Password ProtectionTo Display Software Version Number To Clear Password Protection Screen will say Confirm passwordTo Perform Software Reset To Communicate with a PC using PC Comms Software Cm min samplesExample Printout of Readings taken in Measure Mode Printout of Setup and Readings taken by Characteristic Printout of Analysis by Characteristic Printout of details of all Characteristic setups Printout of Round setup Printout of Readings taken by Characteristic Rotary and Stationary Joint Kits Nominal Joint Stiffnesses Deg/lbft LbftDwg. TPA1919 Pictured Parts ListNot Callout Description Joint Kit NumberCpK CharacteristicGlossary of Terms Industry Standard Transducer I/S High Output Transducer H/OHorizontal Sampling Max Torque ValueVertical Plus Prompt Threshold Torque ValueUnits of Measure Error Messages Code Message ExplanationINCOR-TX OP Code ERR External Connections Dwg. TPA18227529eng.fm Page 62 Wednesday, November 12, 2003 857 AM 7529eng.fm Page 63 Wednesday, November 12, 2003 857 AM 7529eng.fm Page 64 Wednesday, November 12, 2003 857 AM 0102