Ingersoll-Rand ETA2, ETA5 manual Select Frequency Response using Then press Enter

MENU MENU

7529_eng.fm Page 20 Wednesday, November 12, 2003 8:57 AM

Select Frequency Response using ; then press Enter

Note: No prompt will appear for frequency response if this value is set as a default during a software reset.

Type in maximum torque specification	__________ ,	then press	Enter
Type in minimum torque specification ___________ , then press			Enter
Type in threshold torque value ________________ , then press			Enter
Select ‘Second Parameter’ using	, press	Enter

If you have selected ‘Click Dip’, type in amount of ‘Dip’ to be sensed, press Enter

Note: 5% of torque value for 0 to 100 Nm and 10% of torque value for over 100 Nm generally provide excellent results.

Type in number of characters to reserve for subgroup comment, then press Enter

To return to main menu, press

Note: Repeat above steps for each additional job or characteristic. If you wish to establish a route or ‘ROUND’, enter all of your characteristics or jobs now.

20