Ingersoll-Rand ETA5, ETA2 manual Incor-Tx

7529_eng.fm Page 59 Wednesday, November 12, 2003 8:57 AM

Code	Message	Explanation
123	AZ DISCR	An auto-zero calibration on the transducer has
		detected an excessive discrepancy between the
		Tracking and Peak inputs.
124	Tx FAULT	Adc saturation due to transducer fault, no
		transducer fitted or over torque.
200	INCOR-TX	The correct transducer is not connected.
300	IN ROUND	This characteristic has already been included in
		the round.
301	CHARACTS	A minimum of two characteristics must be defined
		before entering Edit Round.
306	RS232	Invalid RS232 data on the serial input.
400	INVALID	Incorrect time or date format.
600	ONLY 1	Only one round programmed so not possible to
		generate master round.
601	NO RND	No rounds programmed so not possible to gener-
		ate master round.
602	IN M RND	This round has already been entered into the
		master round. It is not possible to enter a round
		twice.
701	RND COMP	The round is complete, no skipping is allowed.
702	ALL SKIP	All other characteristics have already been
		skipped.
800	MEMORY	Message on power up if memory error found.
		(See note below)
801	MENU ERR	Invalid menu entered due to fault.
802	PROM CKS	The EPROM has an error.

59