Ingersoll-Rand ETA5, ETA2 manual 7529eng.fm Page 3 Wednesday, November 12, 2003 857 AM

Page 4

7529_eng.fm Page 3 Wednesday, November 12, 2003 8:57 AM

		CAUTION

• The unit should be checked periodi-			• For calibration or repair, return to:
	cally to ensure that the torque readings
	are accurate.		Ingersoll-Rand
• DO NOT store the unit in relative			ETA Dept.
	humidity above 85%.		510 Hester Dr.
• Have the unit calibrated at least once a			Whitehouse, TN 37188
•	year.
	Keep the exterior of the unit clean and		Ingersoll-Rand IDC
	dry.		ETA Dept.
• Do not drop or abuse the unit.			Swan Lane, Hindley Green
• Do not allow chemicals such as ace-			Nr. Wigan
	tone, benzene, thinner, ketone or		Lancashire, WN2 4EZ
	trichloroethylene to come in contact		U.K.
	with the housings, as damage will
	result.

•The instrument should not be sub- jected to vibration or shock.

Ingersoll-Rand Company makes no warranty or implies any warranty or liabilities due to the misuse or damage resulting from the application of the information supplied by this manual.

Liabilities due to errors in the manual are only limited to replacement of the manual.

Ingersoll-Rand reserves the right to change information contained in this manual or the pro- gram without notice at any time.

All programs and themanual are copyrighted and rights reserved. Reproduction is prohibited without prior permission of Ingersoll-Rand.

The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool performance, and increased maintenance, and may invalidate all warranties.

Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll- Rand Authorized Servicenter.

3

Image 4

Contents Operators Manual Operators Manual for Model ETA2 and ETA5 Analyzers Placing Analyzer in Service 7529eng.fm Page 3 Wednesday, November 12, 2003 857 AM Save These INSTRUCTIONS. do not Destroy Table of Contents 7529eng.fm Page 6 Wednesday, November 12, 2003 857 AM How to use this Manual Following method is adopted throughout this manualPacking List Battery Charging Care and StorageFor ETA2 Edit Transducer FileFor ETA5 If you have chosen I/S If you have selected H/O Barcode read input for characteristic Names and comments If you have selected KEYMeasure Mode Up to 200 readings stored Type in amount of Dip press Printing of stored readings from measure mode Measure Mode Circle-Store OptionTo select this option From main menu Press Direct Direct Measure Setup 7529eng.fm Page 18 Wednesday, November 12, 2003 857 AM To set up a Characteristic ETA5 only Select Frequency Response using Then press Enter Direct Characteristic Mode ETA5 only Through the available characteristics and press7529eng.fm Page 22 Wednesday, November 12, 2003 857 AM To Store Data single characteristic ETA5 only 7529eng.fm Page 24 Wednesday, November 12, 2003 857 AM To set up a Round ETA5 only Screen will show Characteristic No 2 of ?To Store Data by Round ETA5 only To set up a Master Round ETA5 only Set-upNext job, it will switch back when you press To Store Data by Master RoundTo return to the main menu, press Menu Menu If you haveTo Display Recorded Data on ETA2 To Display Recorded Data on ETA5To View Cp and Cpk To Erase Readings Stored in Measure Mode French Cp and CpkTo Erase Stored Data To set this functionTo Erase Characteristic Setup To Erase Stored Data and Setups on ETA5To Erase Characteristic Data To Erase Round Setup Information To Erase Round DataTo print details of Setup or Analysis of Data from ETA5 PrintingTo print details of readings by round To print details of setup and analysis of readings by round To print details of all characteristic setupsTo print details of a particular round setup To print readings taken by characteristicThen press Print Measure Printing Data to PC To Set Date and TimeTo Set Power Off and Backlight Time Delays To Configure Printer PortTo Display Software Version Number To Set Password ProtectionDisplay window Pressing Will remove the protection To Clear Password Protection Screen will say Confirm passwordTo Perform Software Reset To Communicate with a PC using PC Comms Software Cm min samplesExample Printout of Readings taken in Measure Mode Printout of Setup and Readings taken by Characteristic Printout of Analysis by Characteristic Printout of details of all Characteristic setups Printout of Round setup Printout of Readings taken by Characteristic Rotary and Stationary Joint Kits Nominal Joint Stiffnesses Deg/lbft LbftDwg. TPA1919 Parts List NotPictured Callout Description Joint Kit NumberGlossary of Terms CharacteristicCpK High Output Transducer H/O Horizontal SamplingIndustry Standard Transducer I/S Max Torque ValueUnits of Measure Threshold Torque ValueVertical Plus Prompt Error Messages Code Message ExplanationINCOR-TX OP Code ERR External Connections Dwg. TPA18227529eng.fm Page 62 Wednesday, November 12, 2003 857 AM 7529eng.fm Page 63 Wednesday, November 12, 2003 857 AM 7529eng.fm Page 64 Wednesday, November 12, 2003 857 AM 0102