7529_eng.fm Page 2 Wednesday, November 12, 2003 8:57 AM
PLACING ANALYZER IN SERVICE
•Always install, operate, inspect and maintain this product in accordance with all applicable standards and regulations (local, state, country, fed- eral, etc.).
•Keep work area clean, uncluttered, ventilated and illuminated.
•Do not remove any labels. Replace any damaged label.
USING THE ANALYZER
•Always wear eye protection when oper- ating or performing maintenance on this tool.
•Always use Personal Protective Equip- ment appropriate to the tool used and material worked. This may include dust mask or other breathing apparatus, safety glasses, ear plugs, gloves, apron, safety shoes, hard hat and other equipment.
•Keep others at a safe distance from your work area, or ensure they use appropriate Personal Protective Equip- ment.
•This tool is not insulated against elec- tric shock.
•This unit is for indoor use only.
•Store idle units. When not in use, units should be stored in a dry, high or locked location, out of the reach of chil- dren.
•Power tools can vibrate in use. Vibra- tion, repetitive motions or uncomfort- able positions may be harmful to your hands and arms. Stop using any tool if discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use.
•Keep body stance balanced and firm. Do not overreach when operating this tool. Anticipate and be alert for sudden changes in motion, reaction torques, or forces during start up and operation.
•Ensure work pieces are secure. Use clamps or vises to hold work piece whenever possible.
•Never use a damaged or malfunction- ing tool or accessory.
•Maintain unit with care. Keep unit clean for better and safer performance. Fol- low instructions for changing accesso- ries. Inspect unit cords periodically and if damaged, have them repaired by an authorized service facility.
•Do not operate this product in explo- sive atmospheres, such as in the pres- ence of flammable liquids, gases or dust.
•Do not modify this product, safety devices, or accessories.
•Do not use this product for purposes other than those recommended.
•Use accessories recommended by
•Don’t abuse the cord. Never use the cord to pull the plug from an outlet. Keep cords away from heat, oil, sharp edges or moving parts. Replace dam- aged cords immediately.
•Avoid body contact with grounded sur- faces such as pipes, metal structures or other electrical products.
•Stay alert, watch what you are doing and use common sense when operat- ing this product. Do not use this prod- uct while tired or under the influence of drugs, alcohol, or medication.
•Do not use this product near water or other liquids.
•Do not attach or place external loads on any part of the unit.
•Replace battery with the same or equiv- alent type recommended by the battery manufacturer. Observe correct polarity when installing battery. Dispose of used batteries according to battery manufacturer’s instructions.
2