Sanyo DSR-2108 instruction manual Operating the PTZ dome camera, Connection Operation, Settings

Operating the PTZ dome camera

Pan/Tilt, Zoom/Focus operations are possible from this unit when a coaxial superimposed type (COAX) camera is connected, or a PTZ dome camera is connected using the RS-485 control terminal. Operation may not be possible depending on the connected camera.

1

Connection

3

Operation

When connecting other than a coaxial superimposed type (COAX) camera, connect the RS-485 control terminal of this unit and that of the camera using a twisted pair cable.

Refer to "Connecting the RS-485 control terminal (P6)".

1Select the number of the PTZ dome camera connected using the camera selection button.

2Press the PTZ button.

The control screen is displayed.

2Settings

1Press the MENU button (the MAIN MENU is displayed) and select "SYSTEM" using the control button (}~).

	MAIN MENU		SYSTEM
			DVR ID	DVR
			DESCRIPTION
			LOAD DEFAULT
			ADMIN PASSWORD
			USER PASSWORD
LIVE	RECORD	SYSTEM	NETWORK PASSWORD
			DATE FORMAT	YYYY/MM/DD
			CLOCK SET
			RS485 SET
			PTZ CONTROL
NETWORK	HDD SET	SERVICE	LANGUAGE	ENGLISH
			REMOTE CONTROL ID	00

•A password is requested when pressing the MENU button. Enter the ADMIN PASSWORD. (P38)

2Place the cursor on "PTZ CONTROL" and press the ENTER button.

The PTZ screen is displayed.

	PTZ
DATA SPEED	9600
CHANNEL		11
PROTOCOL	- - - -
ADDRESS	1

3Point the cursor to "DATA SPEED" and set the communication speed.

The set speed is applied to all channels except for SANYO protocol.

Set the communication speed for the SANYO protocol using RS485 SET. (P40)

4Point the cursor to "CHANNEL", specify the channel and set the "PROTOCOL" and "ADDRESS".

PROTOCOL: Selecting the type of protocol

ADDRESS: Camera ID (0 - 63)

When connecting multiple cameras to the RS-485 control terminal, set the same protocol for all cameras except for those cameras connected with SANYO protocol.

5Press the EXIT/STOP button once the settings are complete.

3Controlling the camera

Control functions available differ according to the camera model.

:A 2% 2009/05/03 09:04:54

PAN/TILT

ZOOM/FOCUS

IRIS/TOUR/SEQUENCE

MENU

b Pan/Tilt operations

1Select "PAN/TILT" using the control button ({) and press the ENTER button.

2Adjust the tilt position using the control button ({) and adjust the pan position using the control button (}~).

3To perform automatic panning press the ENTER button.

•The following message is displayed on the screen. Up/Down key: Tilt Up/Down

Left/Right key: Pan Left/Right

Enter key: Auto Pan

b Zoom/Focus operations

1Select "ZOOM/FOCUS" using the control button ({) and press the ENTER button.

2Adjust the zoom using the control button ({) and adjust the focus position using the control button (}~).

3To activate the auto focus press the ENTER button.

• The following message is displayed on the screen. Up/Down key: Zoom In/Out

Left/Right key: Focus Near/Far

Enter key: Auto Focus

14