Sanyo DSR-2108 Operations using the Network, Network connection, Network settings

Page 57

Operations using the Network

This unit can be operated from a PC screen by using the supplied network operation software "Sanyo DVR Utility 2000S".

Prior to performing network operations make the following preparations.

Connection and settings

•Network connection:

Connect this unit and the PC using a LAN or Internet connection. (P5)

•Network settings:

Set the network connection settings on the NETWORK screen of this unit. (P42)

•The IP address and other settings on the PC must be appropriate for the connection.

•The maximum number of PCs that can be connected to one DVR is 4.

Installing "Sanyo DVR Utility 2000S"

Install using the interactive screen.

1Insert the supplied CD-ROM in the CD drive and double-click "Sanyo Client.exe".

The installer runs.

2Confirm the installation destination folder on the "Choose Destination Location" screen and click [Next].

To change the installation destination folder, click [Browse] and select a folder.

Operating environment

•CPU: Intel Pentium4 1.2 GHz or higher

•Memory: Windows VISTA: Minimum 512 MB (1 GB or higher recommended) Windows XP: Minimum 256 MB (512 MB or higher recommended)

•VGA: 16 MB (64 MB recommended)

•Resolution: 1024 × 768

•Disk capacity: 10 MB

(More than 2.1GB when using Sanyo recording software)

• Operating System:

Windows VISTA,

Windows XP Professional SP2/Windows XP Home

Direct X: Direct X 8.1 or above

50

Image 57

Contents DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautionsBDisassembly prohibited Safety precautionsBDo not use during thunder/thunder storms BDo not touch the power plug with wet handsBDo not place in an unstable position BDo not sit onBWhen the unit is set up in a rack BCleaning the internal componentsBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsWhen disposing of this unit Battery fluid leaksMain parts replacement timings Main Features AccessoriesPower cable ×2 Remote control Check that all the parts shown below are suppliedDo not expose to shock or vibration About the split screen displayNames and functions of parts Names of each part and connections Cooling fan Power socketBWithout using a switching hub LAN connection BUsing the switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a camera is connected If a system controller is connectedSanyo SSP Except SanyoSwitching the power on / off Switching the power onSwitching the power off Pre-operation preparation BExample of multi-16 screenBExample of single-screen Setting the clock Clock SET Settingoutput the television system and the monitorPre-operation preparation BMatching the television system of the camera PALOhters OFFUSA Setting the RS-485 termination switch Sanyo SSP side Setting the language LanguageBCorrecting the set time Language selectionMonitoring the camera videos Single-screen displayQuad-screen display Camera sequencing Monitoring the camera videosPress the Multi button Press the SEQ button once operations are completeSettings Operating the PTZ dome cameraConnection Operation Camera menu settings Operating the PTZ dome cameraIris/Tour/Sequence operations Recording Recording Continuous recordingMotion recording Set the following items using the control button ~ Alarm recordingResolution Frame Rate Schedule recordingChannel Quality Press the EXIT/STOP button BCopying a set recording schedule to other channelsPlaying back recorded videos If the 4 letters are displayed in red, all the type Playing back recorded videosRecordings have been selected ExampleMonth displayed by the calendar, pressing Move the cursor to the day of the first recordingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslySearch menu screen is displayed Press the Search buttonPress the Enter button. Playback starts First recording is played backPress the Search button. The menu is displayed List is displayedStill image is displayed Inserting recording media Copying recorded video to recording mediaCopying live videos To copy onto a USB memoryCopying a playback video Copying recorded video to recording mediaPlaying back copied videos StillBSetting a security lock Setting the security lockBCanceling the security lock Factory default password isBLIVE settings P31 BRECORD settings P35 Configuration and function of the Menu settingsBSYSTEM settings P37 BNETWORK settings P42BBasic operations of the Main Menu Configuration and function of the Menu settingsMain Menu screen is displayed Record menu is displayedSetting the OSD and OSD Contrast Live settingsSetting the Sequence Setting the Event BeepLive settings Setting the HDD Error Setting the Video Loss onSetting the Alarm Duration Setting the TypeSetting the MON2 Channel Setting the SEQUENCE-DWELL TimeSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFSetting the Resolution Record settingsSetting the Frame Rate Unit ips Setting the QualityRecord settings Setting the DVR ID System settingsSetting the Load Default Description confirmationSetting an Admin Password System settingsBSettings for no password Press the Enter button without inputting anythingBRestoring the password input Setting the User PasswordSetting a Network Password Setting the Clock SET Setting the Date FormatSetting the RS485 SET Setting the PTZ ControlSetting a Remote Control ID BOperating this unit via the remote controller ID ExampleSelection 01/02/ .. /99 Setting the Port Network settingsSetting a Client Access Setting the Bandwidth SavingSetting the Network Type Network settingsBIf selecting Adsl BIf selecting DhcpConfirm the User ID and Password displayed on the screen Setting the DdnsBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Mail to Setting the NTP SETMail Server Mail fromSetting the Overwrite HDD SET settingsFormat settings Initializes the internal hard diskSetting the auto delete function HDD SET settingsSetting the Save Setup to a USB Service settingsSetting the Load Setup from a USB Displays the hard disk informationNetwork settings Operations using the NetworkResolution 1024 × Disk capacity 10 MB Network connectionOperations using the Network Software starts installingInstallation is complete BConnecting for the first time Connecting to this unitDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Main screen basic operations Switching the display mode of the screenMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSwitching recording functions BSequence camera switch displayMain screen basic operations Recording live video BRecording methodFreezing the live video Audio is outputSaving images Operating the PTZ dome camera Sets the menu using this unitBFor Pan/Tilt operations BFor Zoom/Focus operationsStart Point Search mode operationsEND Point Back UPSearching and playing recorded video Search mode operationsBacking up DVR recorded video General settings General Setup menu settingsCamera designation settings Site Setup menu settingsBModify the registered content Modify BRegistering the additional DVR AdditionEvent log search, view, save Log View Event settings EventRecord settings Record Disk settings DiskVersion information About Remote Setup operating procedure Remote SetupClicking Cancel Clicking ApplyRemote Setup BCommon settings General BChannel-specific settingsOSD BAlarm Out Setting the Alarm-SetBSetting an alarm input terminal BSetting an alarm output terminalSetting the Monitor2 If Sequence is set to OFFIf Sequence is set to on BResolution Common to all channels Setting the RecordBSetting the Schedule recording BSetting the detection frameClick the Timer Set button Click or drag a grid cell in the desired detection frameBSetting the System System settingsBClock Set S.T./SUMMER Time P10BPTZ Control DescriptionRS-485 Data SpeedSetting the Network BDDNS settingsBNetwork settings Setting the Storage Setting the NTPReturn Mail Address NTP USEBFunctions of the main operation panel Operations using the Web browserBFunctions of the search operation panel Operations using the Web browserBSaving moving videos to the PC BSaving still images to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control BDimensions unit mm SpecificationsDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listHDD 1 HDD Mounting the hard disk S-ATAMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD