Sanyo DSR-2108 instruction manual Battery fluid leaks, When disposing of this unit

Page 7

Safety precautions

Follow the points outlined below for proper use

bBack up battery.

bMaintaining this unit

This unit has got a built-in lithium battery used to back up the clock function. The battery continues to operate the clock even when there is a power disruption.

The life expectancy of the battery is approximately 2 years. If the battery runs out or leaks, the clock resets when the power is turned off. When the power is turned back on (or when rebooted), a warning message to replace the battery is displayed on the monitor screen. Consult the dealership where this unit was purchased or a "Repair Service Center".

Battery fluid leaks

In the event that the battery fluid has leaked rinse hands/ clothes thoroughly with water.

Loss of eyesight may result if battery fluid enters the eyes. Do not rub the eyes. Immediately rinse with clean water and consult a physician.

When disposing of this unit

Consult the dealership where this unit was purchased for information concerning the disposal of the lithium battery.

CAUTION:

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

bIf unused for a lengthy period of time

Remove the power plug from the outlet. Remember to occasionally turn the power on in order to maintain correct function.

bPre-confirm important recording assignments

Recording and/or playback functions may be unavailable due to hard-drive or connecting unit failures. Always confirm that recording can be carried out successfully before carrying out important recording assignments. The recorded content cannot be guaranteed.

It is recommended to periodically back up data in order to prevent the loss of the data in the event of breakdowns, recording faults or accidents.

Turn the power off and remove the power plug from the outlet. Wipe away any dust using a soft cloth.

When the stains are hard to remove...

Soak a cloth in water with diluted neutral detergent and wring it. Wipe the stain with the moistened cloth and finally dry off with a dry cloth.

CAUTION:

Do not use paint thinner, benzine, or any other alcohol based agents for cleaning. The exterior may deteriorate or the paint may wear off.

Follow the instructions supplied on the packaging of the chemical cleaning agent.

Do not spray volatile substances, such as insecticides, etc. onto the unit. Also, avoid extended contact with rubber or vinyl products.

This may cause exterior damage or wear the paint off.

bCopyright information

This manual and software are copyrighted to SANYO Electric Co., Ltd.

Microsoft, Windows and Internet Explorer are trademarks or registered trademarks of Microsoft USA in the USA and in other countries.

Intel and Pentium is a trademark or registered trademark of Intel USA in the USA and in other countries.

Brand and product names used in this manual are the trademarks or registered trademarks of their respective companies.

Except for personal use, copyright law prohibits the use of recorded copyrighted images without the permission of the copyright holder.

bPersonal data protection

Images or footage recorded by the camera video system in which people are captured and can be identified are considered to be personal information and fall within the scope of the Personal Data Protection Law. It is the responsibility of the user to operate the system in accordance with the above law.

vi

Image 7
Contents DSR-2116 DSR-2108 Table of Contents Licensed Under U.S. Patent No ,974,088 Safety precautionsBDisassembly prohibited Safety precautionsBDo not sit on BDo not touch the power plug with wet handsBDo not use during thunder/thunder storms BDo not place in an unstable positionBDo not block the cooling fans or air ducts BCleaning the internal componentsBWhen the unit is set up in a rack BDo not expose to extreme temperatures or humidity changesWhen disposing of this unit Battery fluid leaksCheck that all the parts shown below are supplied Main Features AccessoriesMain parts replacement timings Power cable ×2 Remote controlDo not expose to shock or vibration About the split screen displayNames and functions of parts Names of each part and connections Cooling fan Power socketInternet DHCP, Adsl connection LAN connection BUsing the switching hubBWithout using a switching hub Names of each part and connectionsExcept Sanyo If a system controller is connectedIf a camera is connected Sanyo SSPSwitching the power on Switching the power on / offSwitching the power off BExample of multi-16 screen Pre-operation preparationBExample of single-screen BMatching the television system of the camera PAL Settingoutput the television system and the monitorSetting the clock Clock SET Pre-operation preparationOFF OhtersUSA Language selection Setting the language LanguageSetting the RS-485 termination switch Sanyo SSP side BCorrecting the set timeSingle-screen display Monitoring the camera videosQuad-screen display Press the SEQ button once operations are complete Monitoring the camera videosCamera sequencing Press the Multi buttonOperating the PTZ dome camera SettingsConnection Operation Operating the PTZ dome camera Camera menu settingsIris/Tour/Sequence operations Recording Continuous recording RecordingMotion recording Set the following items using the control button ~ Alarm recordingSchedule recording Resolution Frame RateChannel Quality Press the EXIT/STOP button BCopying a set recording schedule to other channelsPlaying back recorded videos Example Playing back recorded videosIf the 4 letters are displayed in red, all the type Recordings have been selectedMemo To play the video of all the channels simultaneously Move the cursor to the day of the first recordingMonth displayed by the calendar, pressing Button displays the previous month of the calendarFirst recording is played back Press the Search buttonSearch menu screen is displayed Press the Enter button. Playback startsList is displayed Press the Search button. The menu is displayedStill image is displayed To copy onto a USB memory Copying recorded video to recording mediaInserting recording media Copying live videosStill Copying recorded video to recording mediaCopying a playback video Playing back copied videosFactory default password is Setting the security lockBSetting a security lock BCanceling the security lockBNETWORK settings P42 Configuration and function of the Menu settingsBLIVE settings P31 BRECORD settings P35 BSYSTEM settings P37Record menu is displayed Configuration and function of the Menu settingsBBasic operations of the Main Menu Main Menu screen is displayedSetting the Event Beep Live settingsSetting the OSD and OSD Contrast Setting the SequenceLive settings Setting the Type Setting the Video Loss onSetting the HDD Error Setting the Alarm DurationIf Sequence is set to OFF Setting the SEQUENCE-DWELL TimeSetting the MON2 Channel Sets the channel that outputs the video to MON2 terminalSetting the Quality Record settingsSetting the Resolution Setting the Frame Rate Unit ipsRecord settings Description confirmation System settingsSetting the DVR ID Setting the Load DefaultPress the Enter button without inputting anything System settingsSetting an Admin Password BSettings for no passwordSetting the User Password BRestoring the password inputSetting a Network Password Setting the PTZ Control Setting the Date FormatSetting the Clock SET Setting the RS485 SETBOperating this unit via the remote controller ID Example Setting a Remote Control IDSelection 01/02/ .. /99 Setting the Bandwidth Saving Network settingsSetting the Port Setting a Client AccessBIf selecting Dhcp Network settingsSetting the Network Type BIf selecting AdslRepeat 2 and change the following as necessary Setting the DdnsConfirm the User ID and Password displayed on the screen BIf selecting LANSetting the Send E-MAIL Mail from Setting the NTP SETMail to Mail ServerInitializes the internal hard disk HDD SET settingsSetting the Overwrite Format settingsSetting the auto delete function HDD SET settingsDisplays the hard disk information Service settingsSetting the Save Setup to a USB Setting the Load Setup from a USBNetwork connection Operations using the NetworkNetwork settings Resolution 1024 × Disk capacity 10 MBSoftware starts installing Operations using the NetworkInstallation is complete BWhen there are several connections Connecting to this unitBConnecting for the first time DisconnectingMain screen structure and function of each part Main screen structure and function of each part DSR-2108, the only available multi-screen is multi-8 screen Switching the display mode of the screenMain screen basic operations Multi-screen displayRecording live video BRecording method BSequence camera switch displayBSwitching recording functions Main screen basic operationsAudio is output Freezing the live videoSaving images BFor Zoom/Focus operations Sets the menu using this unitOperating the PTZ dome camera BFor Pan/Tilt operationsBack UP Search mode operationsStart Point END PointSearching and playing recorded video Search mode operationsBacking up DVR recorded video General settings General Setup menu settingsBRegistering the additional DVR Addition Setup menu settingsCamera designation settings Site BModify the registered content ModifyEvent log search, view, save Log View Event settings EventDisk settings Disk Record settings RecordVersion information About Clicking Apply Remote SetupRemote Setup operating procedure Clicking CancelBCommon settings General BChannel-specific settings Remote SetupOSD BSetting an alarm output terminal Setting the Alarm-SetBAlarm Out BSetting an alarm input terminalIf Sequence is set to OFF Setting the Monitor2If Sequence is set to on BResolution Common to all channels Setting the RecordClick or drag a grid cell in the desired detection frame BSetting the detection frameBSetting the Schedule recording Click the Timer Set buttonS.T./SUMMER Time P10 System settingsBSetting the System BClock SetData Speed DescriptionBPTZ Control RS-485BDDNS settings Setting the NetworkBNetwork settings NTP USE Setting the NTPSetting the Storage Return Mail AddressBFunctions of the main operation panel Operations using the Web browserBFunctions of the search operation panel Operations using the Web browserSelect the Channel 2 to be saved Click the OK 3 button BSaving still images to the PCBSaving moving videos to the PC Click the Capture buttonPart names of the remote control BDVR ID input display list SpecificationsBDimensions unit mm Dimensions of DSR-2116 and DSR-2108 are the sameHDD 1 HDD Mounting the hard disk S-ATAMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD