Sanyo DSR-2108 Record settings Record, Disk settings Disk, Version information About

Page 72

Setup menu settings

ERecord settings (Record)

Sets the recording conditions while in network operations. Recorded video is saved on the hard disk of the PC.

1

2

3

1Record Condition

Select a recording mode using the radio button.

•Always:

Recording is performed when the recording button on the operation panel is set to ON.

•Event:

When the recording button on the operation panel is set to ON, recording is on standby and recording is performed when specified events occur.

<Automatic recording settings (Auto Record)>

If the checkbox is checked, the recording button on the operation panel is set to ON and video is automatically recorded in the selected recording mode only after you launch the DVR Utility 2000S the next time.

[Auto Record] settings become valid as soon as the unit has been disconnected and reconnected.

2Event

If [Record Condition] is set to "Event", set the following conditions.

<Event types>

•Motion:

When this unit performs a MOTION recording the event is also recorded on the PC.

•Alarm:

When an alarm signal is input into the external sensor terminal situated on the back panel of this unit, the event is recorded on the PC.

<Recording duration>

• Duration (Unit: seconds)

3Channel

Specify the camera to be recorded using the checkbox.

Memo: Using "All" of the checkbox, the user can check or uncheck all the cameras.

Click [OK] once the above settings are complete. The content of the settings are confirmed and saved.

FDisk settings (Disk)

Set the capacity and the drive of the PC where the recorded video is saved.

1

2

1Disk Space

Select the drive used for saving and input the allowable capacity (MB).

2Disk Full

Select the option once the capacity is exceeded using the radio button.

•Replace oldest files:

Continues to record and overwrites the previously recorded video starting with the oldest.

•Stop recording: Stops the recording.

Click [OK] once the above settings are complete. The content of the settings are confirmed and saved.

GVersion information (About)

The version information of the currently used software can be confirmed.

65

Image 72

Contents DSR-2116 DSR-2108 Table of Contents Safety precautions Licensed Under U.S. Patent No ,974,088Safety precautions BDisassembly prohibitedBDo not touch the power plug with wet hands BDo not use during thunder/thunder stormsBDo not place in an unstable position BDo not sit onBCleaning the internal components BWhen the unit is set up in a rackBDo not expose to extreme temperatures or humidity changes BDo not block the cooling fans or air ductsBattery fluid leaks When disposing of this unitMain Features Accessories Main parts replacement timingsPower cable ×2 Remote control Check that all the parts shown below are suppliedAbout the split screen display Do not expose to shock or vibrationNames and functions of parts Cooling fan Power socket Names of each part and connectionsLAN connection BUsing the switching hub BWithout using a switching hubNames of each part and connections Internet DHCP, Adsl connectionIf a system controller is connected If a camera is connectedSanyo SSP Except SanyoSwitching the power on / off Switching the power onSwitching the power off Pre-operation preparation BExample of multi-16 screenBExample of single-screen Settingoutput the television system and the monitor Setting the clock Clock SETPre-operation preparation BMatching the television system of the camera PALOhters OFFUSA Setting the language Language Setting the RS-485 termination switch Sanyo SSP sideBCorrecting the set time Language selectionMonitoring the camera videos Single-screen displayQuad-screen display Monitoring the camera videos Camera sequencingPress the Multi button Press the SEQ button once operations are completeSettings Operating the PTZ dome cameraConnection Operation Camera menu settings Operating the PTZ dome cameraIris/Tour/Sequence operations Recording Recording Continuous recordingMotion recording Alarm recording Set the following items using the control button ~Resolution Frame Rate Schedule recordingChannel Quality BCopying a set recording schedule to other channels Press the EXIT/STOP buttonPlaying back recorded videos Playing back recorded videos If the 4 letters are displayed in red, all the typeRecordings have been selected ExampleMove the cursor to the day of the first recording Month displayed by the calendar, pressingButton displays the previous month of the calendar Memo To play the video of all the channels simultaneouslyPress the Search button Search menu screen is displayedPress the Enter button. Playback starts First recording is played backPress the Search button. The menu is displayed List is displayedStill image is displayed Copying recorded video to recording media Inserting recording mediaCopying live videos To copy onto a USB memoryCopying recorded video to recording media Copying a playback videoPlaying back copied videos StillSetting the security lock BSetting a security lockBCanceling the security lock Factory default password isConfiguration and function of the Menu settings BLIVE settings P31 BRECORD settings P35BSYSTEM settings P37 BNETWORK settings P42Configuration and function of the Menu settings BBasic operations of the Main MenuMain Menu screen is displayed Record menu is displayedLive settings Setting the OSD and OSD ContrastSetting the Sequence Setting the Event BeepLive settings Setting the Video Loss on Setting the HDD ErrorSetting the Alarm Duration Setting the TypeSetting the SEQUENCE-DWELL Time Setting the MON2 ChannelSets the channel that outputs the video to MON2 terminal If Sequence is set to OFFRecord settings Setting the ResolutionSetting the Frame Rate Unit ips Setting the QualityRecord settings System settings Setting the DVR IDSetting the Load Default Description confirmationSystem settings Setting an Admin PasswordBSettings for no password Press the Enter button without inputting anythingBRestoring the password input Setting the User PasswordSetting a Network Password Setting the Date Format Setting the Clock SETSetting the RS485 SET Setting the PTZ ControlSetting a Remote Control ID BOperating this unit via the remote controller ID ExampleSelection 01/02/ .. /99 Network settings Setting the PortSetting a Client Access Setting the Bandwidth SavingNetwork settings Setting the Network TypeBIf selecting Adsl BIf selecting DhcpSetting the Ddns Confirm the User ID and Password displayed on the screenBIf selecting LAN Repeat 2 and change the following as necessarySetting the Send E-MAIL Setting the NTP SET Mail toMail Server Mail fromHDD SET settings Setting the OverwriteFormat settings Initializes the internal hard diskHDD SET settings Setting the auto delete functionService settings Setting the Save Setup to a USBSetting the Load Setup from a USB Displays the hard disk informationOperations using the Network Network settingsResolution 1024 × Disk capacity 10 MB Network connectionOperations using the Network Software starts installingInstallation is complete Connecting to this unit BConnecting for the first timeDisconnecting BWhen there are several connectionsMain screen structure and function of each part Main screen structure and function of each part Switching the display mode of the screen Main screen basic operationsMulti-screen display DSR-2108, the only available multi-screen is multi-8 screenBSequence camera switch display BSwitching recording functionsMain screen basic operations Recording live video BRecording methodFreezing the live video Audio is outputSaving images Sets the menu using this unit Operating the PTZ dome cameraBFor Pan/Tilt operations BFor Zoom/Focus operationsSearch mode operations Start PointEND Point Back UPSearch mode operations Searching and playing recorded videoBacking up DVR recorded video Setup menu settings General settings GeneralSetup menu settings Camera designation settings SiteBModify the registered content Modify BRegistering the additional DVR AdditionEvent settings Event Event log search, view, save Log ViewRecord settings Record Disk settings DiskVersion information About Remote Setup Remote Setup operating procedureClicking Cancel Clicking ApplyRemote Setup BCommon settings General BChannel-specific settingsOSD Setting the Alarm-Set BAlarm OutBSetting an alarm input terminal BSetting an alarm output terminalSetting the Monitor2 If Sequence is set to OFFIf Sequence is set to on Setting the Record BResolution Common to all channelsBSetting the detection frame BSetting the Schedule recordingClick the Timer Set button Click or drag a grid cell in the desired detection frameSystem settings BSetting the SystemBClock Set S.T./SUMMER Time P10Description BPTZ ControlRS-485 Data SpeedSetting the Network BDDNS settingsBNetwork settings Setting the NTP Setting the StorageReturn Mail Address NTP USEOperations using the Web browser BFunctions of the main operation panelOperations using the Web browser BFunctions of the search operation panelBSaving still images to the PC BSaving moving videos to the PCClick the Capture button Select the Channel 2 to be saved Click the OK 3 buttonPart names of the remote control Specifications BDimensions unit mmDimensions of DSR-2116 and DSR-2108 are the same BDVR ID input display listMounting the hard disk S-ATA HDD 1 HDDMemo Memo Memo L8HBT, L8HBU/XE, US 0609KP-LD