Sanyo DSR-2108 instruction manual Live settings

LIVE settings

DSetting a CHANNEL

To set the video settings on each channel.

Select an item for each setting using the control button ({) and select a setting value using the control button (}~).

●Setting a CHANNEL and the channel designation

1Select "CHANNEL" using the control button ({) and select a channel from the following channels using the control button (}~), press the ENTER button.

Selections: CH1 - CH16

☞In DSR-2108, CH1 - CH8.

The CHANNEL screen used for channel settings is displayed.

When not changing the designation of the channel, only select a channel.

2Select the input position using the control button

({) and select input characters using the control button (}~).

Character selection: (Refer to "DVR ID input display

list": P80)

CHANNEL

H A L L - 1 F

- - - - - - - -

Press the EXIT/STOP button once operations are complete.

Changing the present CH1 display to HALL-1F (Example).

●Setting the DISPLAY

To select "DISPLAY", and set the screen display. ON: Displays live videos

OFF: Does not display live videos

Memo: The display of screen information, such as time and date and channel, depends on the settings of the OSD. (P31)

●Setting the BRIGHTNESS

To select "BRIGHTNESS" and adjust the brightness of the videos.

The brightness of the video changes in real time.

(0 - 100 %)

●Setting the CONTRAST

To select "CONTRAST" and adjust optimally the dark parts and bright parts of the video.

The contrast of the image changes in real time.

(0 - 100 %)

●HUE settings

To select "HUE" and adjust the hue of the video.

The hue of the images changes in real time.

(0 - 100 %)

●Setting the SATURATION

To select "SATURATION" and adjust the saturation of the video.

The saturation of the images changes in real time.

(0 - 100 %)

Press the EXIT/STOP button once operations are complete.

Press the EXIT/STOP button repeatedly to return to the live screen.

EAlarm input output settings

Sets the alarm input/output conditions of the alarm input/ output terminal.

1Select "ALARM-SET" using the control button ({) and press the ENTER button.

The ALARM-SET screen is displayed.

ALARM-SET

ALARM OUT	ENABLE
ALARM OUT NO.	1
ALARM IN	-- -- -- --
MOTION ON	-- -- -- --
VIDEO LOSS ON	-- -- -- --
HDD ERROR	OFF
ALARM DURATION	5 SEC
ALARM IN NO.	1
TYPE	---

2Select "ALARM OUT" using the control button ({) and set whether or not an alarm signal should be output through this unit using the control button (}~).

ENABLE: An alarm signal is output.

DISABLE: No alarm signal is output.

3Select "ALARM OUT NO." using the control button ({) and specify the alarm output terminal number (1 - 4) using the control button (}~).

Sets the alarm output conditions of the specified alarm output terminal.

●Setting the ALARM IN

An alarm signal is output when the specified external alarm input terminal receives an input.

1Select "ALARM IN" using the control button ({).

2Select the setting position (4 positions) using the control button (}~).

3Select the input terminal number (1 - 16) using the control button ({).

☞ In DSR-2108, input terminal number (1 - 8).

4Press the ENTER button.

●Setting the MOTION ON

An alarm signal is output when the specified video input terminal receives a MOTION detection signal.

1Select "MOTION ON" using the control button ({).

32